Disco 2 Hawkeye Total odometer reset

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
H

Hoylander

New Member
Posts
5
Location
orkney
Anyone know how to stop the odometer flashing on D2 TD5 with a Hawkeye Total?

I've tried via the BCU without success.

It started flashing after continuing to drive with a faulty alternator.
 
So do you say there's no odometer "error warning" setting in hawkeye BCU menu ?, it should be as long as it is in the old hawkeye but might be confusing... try again and disable that one, IIRC it should be saved as "No (odometer) error warning"
 
I've selected "no error warning" but when I come back out of BCU it reverts back to the odo flashing.
Should it be that if I select no odo warning, then come back out of all menus it should stop my odo flashing?
 
Hoylander said:
I've selected "no error warning" but when I come back out of BCU it reverts back to the odo flashing.
Should it be that if I select no odo warning, then come back out of all menus it should stop my odo flashing?
Click to expand...
You have to get to the end and confirm the setting
 
You must log in or register to reply here.

Similar threads

The Wombat
Discovery Td5 Instrument cluster config or programming
Replies
5
Views
755
sierrafery
sierrafery
C
D2 2004 td5 no start immobiliser
Replies
1
Views
803
Chips666
C
P
Central locking,alarm and no start issues
2
Replies
23
Views
3K
Phanc60844
P
G
Disco 3 (LR3) Having a nightmare Discovery 3 (2007)
Replies
17
Views
1K
gawjie
G
T
TD5 no start and C0573 fusebox connector ?!
2
Replies
23
Views
3K
sierrafery
sierrafery
Back
Top