What engine oil?
- Thread starter Ppsvogue
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
dolphinboy
Active Member
- Posts
- 279
- Location
- Bristol
Think rattle on start up is a well-known feature of the V8 petrol and nothing to worry about. It is the tappets before the oil get to them I think (Saint V8 put me right?)
My 4.4 V8 gets Triple R or Fuchs 5W40 fully synth. (Triple R part no. was XGF 050 - £25 for 5 Ltr: Fuchs £32 for 8 Ltrs)
My 4.4 V8 gets Triple R or Fuchs 5W40 fully synth. (Triple R part no. was XGF 050 - £25 for 5 Ltr: Fuchs £32 for 8 Ltrs)
Last edited:
- Posts
- 16,475
Depends on the rattle - Tapping is normal while the Hydraulic Valve Lifters pump up again with oil flow...but a 'Chain' type rattle is usualy the VANOS chain rattling on the guide....
VANOS is the BMW Name for the Variable Valve Timing System and has a stupidly long German name, it uses a chain and guide controlled by a small actuator to vary the valve opening times.
Ont he early M62 engines the guides where made from cheese and wear out, the later ones where a bit more robust.
Trouble is to get rid of the rattle is to replace the VANOS system complete (although I have heard reports of just changing the guide - but unconfirmed) which can get fiddley and expensive apparently!
rewmer
Well-Known Member
- Posts
- 2,082
- Location
- Clacton, Essex, UK
5W40 fully synthetic in mine. 150k on the clock and if left a good while will give a momentary rattle, but otherwise runs like clockwork. I would expect to hear a constant rattle at tickover if the VANOS is playing up. As Saint says the chain tensioners can be a little soft and changing these can be a bit of a cow, but I`m sure if we wait long enough, Saint will have a "how to" to guide us through
v8hotrodboy
Active Member
- Posts
- 522
- Location
- Dover
I use mobil 1 10w 60 extended life. Just done my 4.4 (165k) and seems to be ok. Also ive replaced the chain tensioner, this could help with the rattle you have also. It just screws into the side of the timing chain cover. Look on you tube, the bmw boys put lots of good stuff on there!
https://www.youtube.com/watch?v=UlmxeWHdFOo
https://www.youtube.com/watch?v=UlmxeWHdFOo
Last edited:
5W40 fully synthetic in mine. 150k on the clock and if left a good while will give a momentary rattle, but otherwise runs like clockwork. I would expect to hear a constant rattle at tickover if the VANOS is playing up. As Saint says the chain tensioners can be a little soft and changing these can be a bit of a cow, but I`m sure if we wait long enough, Saint will have a "how to" to guide us through
The popular choice seems to be 5w40 fully synthetic. Is it worth using the Lucas Oil Products (UK) - Heavy Duty & High Performance Lubricants Lucas Oil Heavy Duty Oil Stabilizer with the new oil when doing the oil change?
like lucas a lot, use any good oil, 10w40 as prescribed, or mobil 10w 50 very good, bit pricey - i use shell helix 10w40 change 1/2yearly doing very little miles, engine love frequent change
- Posts
- 58,170
- Location
- Preston Lancs.
Somebody else asked that, and was told 20 litres. Then he came back and said i bought 20 litres and have 11.5 litres left. The bloke that told him 20 litres said, "That's funny, so did I".
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
- Posts
- 58,170
- Location
- Preston Lancs.
The old ones are the best.
Got his answer though. If he has a calculator that is.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Got his answer though. If he has a calculator that is.
He's only done adding up not take away's
- Posts
- 58,170
- Location
- Preston Lancs.
