Recent content by Wormey

If i recall, check the light stalk, the brown wire comes away, you will need a new switch

I used 3-4 packs of wet wipes, worked really well. Daz

Spooky, I've just received my replacement nearside footwell metal in the post. I will let you know how i get on, will be next weekend though, sorry:( Cost me 19.99 plus 10 pounds post/packaging from [email protected] Daz

I have made a bracket that sits behind the spare wheel on the back door. I found that I just ripped the other mounts off. The bottom half of the ariel is protected and the top whip is above body level. Daz

Report it to the rozzers, There will be a marker sent to the national Police computer and if you get hassle from someone using your plates , it will all be record. :)

:) I had the same problem when i went into deep water. water went down vent and into the heater. The instance i turned on the blower, windscreen misted up. solution was to feed a piece of fish tank tube into the fan area from the vent on the front wing and syphone the water out. :p...

I do feel ripped off, will try Ebay next time, :o I take it I swore when I mentioned the main dealer word.:D

I just brought some from the main stealers, about 6 quid each, in fact had them in stock. Easy but fidderly job

check circlips on half shafts first, mine displayed same vibration and the circlip had come off and the whole shaft moved,new circlip and all is well. I have just changed both of my output bearings, front and rear. i had vibration through drive train. easy job but you have to be patient when...

This what I got, http://www.maplin.co.uk/Module.aspx?ModuleNo=45385&&source=14&doy=search :) function Change_Big_One(hURL,Main,thumb){document.getElementById(Main).src = thumb.src.replace('/50/','/300/'); document.getElementById(hURL).href =...

There are two types, one with the bendy arm and one that has just an adjustable screw for cameras that is rock solid on the dash. Clamp mine in middle of dash in open ash tray drawer and the underside of dash. will post piccie later if needed.:)

Try maplins, I brought a clamp that will hold cam corder and camera on dash. It looks like a large peg. Pm me if you need pitures.:)

i received this pile of pants about two weeks ago. :( thought i was the only one. deleted straight away.:)

Not 100% but the one used is a 90 2.5 TD, but not sure if 300tdi worth a look though.:D

Try this link water pump replacement 2.5 N/A T/D engines - LR4x4 - The Land Rover Forum