Recent content by Walshie

Hi all, I have had a bit of a workshop clear out and have a few bits to get shot of. Here we have new parts for a Range Rover Classic -Radius Arm kit including: 4 x Bushes - NTC 6860 4 x Bolts - BX116201L 4 x Nyloc Nuts - NY 120041L 4 x Chassis Bush All new and in packaging. No...

Hi, The plugs are made by AutoLite. I can post all this stuff out as it is mostly light weight etc. Thx S

Hi all, I have a few RR classic bits for sale. RR classic v8 - Set of 8 spark plugs - new and boxed - RTC 3812 Radius arm kit: 4 x Bolts 4 x Nuts 4 x Bush (front) NTC 6860 4 x Bush (rear) NRC 4514 2 x Nuts NY 120041L All new and still in the sealed packaging. ECU - LRZ149 - V8 3.9 - used...

Hi all, My mate has a 52 plate TD4 which has a flat/dead spot at about 70mph in top. It seems to rev and run up to this point but will intermittently hit a real dead spot. The only way to get aorund it is to lift off and decrease speed and then creep up again? Any ideas please? Thanks, W

Thanks for the advice all. I got a set of proper nuts on their way to me - so I'll see if this sorts it. Thanks again! W:p

Thanks - didn't know that! Where would you recommend I look? thanks, W

Hi, Thanks for the note. They seem to be true and balanced up just fine. When they sit on the studs there is a degree of movement - not very much - but might be enough if the nuts don't have a taper to tale it up? W

Hi, I have a RRc and I have replaced the standard alloys with some steel wheels and BFG's. The result - killer whell wobble / vibration. Now, I've had all teh wheels balanced, checked pressures, wear, and all the obvious things. I think that the problem may be that I've just used the old...

Thanks - I got it sorted temporarily and looking for a replacement rad!

Hi. I have just developed a leak in the rad of my '92 RRC 3.9. Latest in a long line of hassles!! I haven't the time to get to it just now but was wondering if I should risk trying to use something like Rad Weld as a short term fix?? Is this stuff safe to use or will I just be storing up...

Thanks - but this is amateur corner!! How do I check the sensor positions?

Hi, I have a 92 RRC 3.9 V8. The ABS light is on. Blink test tells me the stop light switch is the cause. Tried to adjust - got nowhere. Bought a new one but still the same issue. Blink gives me 2-6 stop light switch. Driving me nuts - so really appreciate any ideas??? Thx W

Khryztal: Ah ha - It clicks just the once. As a new switch is only a tenner I'll get one and replace it anyway and see where this gets me. Thanks again for your help!!

Still stuck with the stop light problem. Can't find any problem. Has the switch out and checked the vacuum hose all through and doesn't seem to be any problem. Any ideas? Thx W:doh: