Recent content by ssdisco

hi there I'm interested in engine for a series 3 but am in county durham so a good ride away would you possibly take £200 for it I know I'm being cheeky but could buy a tdi for £300 if possible could you reply to 07817 866848 cheers steve I could collect pretty quick.

hi mate would £500 buy it cheers steve

Hi there interested in land rover where are you and how much mot does it have could I have some idea of price please.

hi there you could always connect a test light to heater plugs in situ one end earthed and the other on plug and get someone to give the heat,if it lights up job done if not it could be the resistor hope this helps.

Hi there have you had a look at brake pads try pressing pedal when driving over rough ground mine does it at the rear hope this helps cheers.

Hi there everyone thanks for the help put new lift pump on and still no good but ran perfect out of a can so took sender unit out and filter was blocked solid cleaned out and now runs perfect cheers.

Cheers for the reply but i dont think its a fuel pipe as it starts no bother no matter how long its left and runs perfect until it gets hot?im thinking something sticking in pump when its getting warm or how about lift pump?cheers:confused:

Hi there thanks for the response the fuel filter is new im starting to think injector pump i hope it isnt but the pump is from a engine which was stood 6 years but it was started regular any ideas how much to get pump recond i have a spare which wont let any diesel through to injectors cheers...

Hi there everyone ive recently put a 2.5na diesel in my series 3,now the problem im having is it will tick over all day no bother but as soon as you drive it will be fine for the first 10 mins and then it will start revving and dying,it revs itself over half throttle and then it will just cut...

Hi guys thanks for all the help ive managed to get engine in and running just need to pipe it all up now and thanks to this forum ive even got a good clutch pedal now (i didnt know they could be adjusted)thankyou all very much.:)

cheers for the help guys as for the studs being too big i havent even got that close yet i will keep you all informed,i have a mate coming this morning to give me a hand easier with two people.

Hi there i dont have a clutch aligning tool so i just centred the best i could,looks to be in the centre.Hope this will be ok.

Thanks for the quick reply mate ive removed rubber engine mounts to get engine a bit lower,had gearbox wedged up but when trying to push engine towards box it kept dropping hope this was my problem cheers.

Hi there everyone im sorry to be a pain but ive just got a good 2.5na diesel engine to put back in my landy,ive swapped clutch engine mounts etc but just couldnt get engine to mate up with gearbox any suggestions tips would be much appreciated cheers steve:confused:

Thanks for the replies i think il try and find a 200tdi probably from a disco cheers.