Recent content by Rob698

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. R

    Freelander 1 Td4 electrical problem, no start ,no obd power.

    It was the fuse box inside the car as well.
  2. R

    Freelander 1 Td4 electrical problem, no start ,no obd power.

    No problem, I also found this link, I think it was on this forum. http://montiloto.skyrock.com/3149472686-Boitier-de-fusible-et-anti-demarrage-sur-Land-Rover-Freelander-TD4.html Its in french, but nothing google translate can't fix.
  3. R

    Freelander 1 Td4 electrical problem, no start ,no obd power.

    So I stripped down my fuse box and found that one of the relay solder points had cracked. Resoldered and fitted and all working.
  4. R

    Freelander 1 Td4 electrical problem, no start ,no obd power.

    Hi, Do you fix it? Mine has done the same thing today. Rob
  5. R

    Freelander 1 Drop link bent after a week

    Links connected, I was hopefully going to strip it down today, but something has come up, I will measure with drop links then remove them and measure again
  6. R

    Freelander 1 Drop link bent after a week

    I know have put some weight on, but I didn't think it was that much:) I have measured all wheel centres to the wheel arch, the rears and drivers measure the same, put passenger front his higher
  7. R

    Freelander 1 Drop link bent after a week

    I was between speed bumps when it went bang, mines a 53 reg, I will check the length of the links tomorrow. Thanks for the replys
  8. R

    Freelander 1 Drop link bent after a week

    Thanks James, It's going in for it's MOT next week, so trying to get it sorted ready. If the roll bar is solid, would that mean the bushes have gone?
  9. R

    Freelander 1 Drop link bent after a week

    Will try and disconnect them tomorrow and see if it will rotate. The car does look higher on the passenger side.
  10. R

    Freelander 1 Drop link bent after a week

    On my way home tonight, there was a loud bang in my front passenger wheel arch. After inspecting it it seems to have bent the new drop link near the top. Before I changed the drop link the ride height on the passenger side was 10mm higher than the drivers side. I replaced both sides last week...
  11. R

    For Sale SOLD

    Hi, Is it still for sale Rob
  12. R

    Freelander 1 Drop links

    Would this cause the ride height to be different? My passenger side is 8mm higher than the drivers after replacing the droplink on my passenger side about 6 months ago, and as started rattling again.
  13. R

    For Sale SOLD

    Hi, Is it a 2a or 2e, also does it have a dash switch Rob
  14. R

    3 Door Body Kit

    You can buy a sticker/ adhesive remover from machine mart, its a rubber wheel that goes on a drill, and it just rubs off. I have used it to remove sticker from my car, also adhesive strips left on friends cars, when they have removed bodykits link below...
  15. R

    Our project Td4

    Actually they don't look that bad, I'd leave it like that, if it does that to mine.
See more
Back
Top