Search results

It was the fuse box inside the car as well.

No problem, I also found this link, I think it was on this forum. http://montiloto.skyrock.com/3149472686-Boitier-de-fusible-et-anti-demarrage-sur-Land-Rover-Freelander-TD4.html Its in french, but nothing google translate can't fix.

So I stripped down my fuse box and found that one of the relay solder points had cracked. Resoldered and fitted and all working.

Hi, Do you fix it? Mine has done the same thing today. Rob

Links connected, I was hopefully going to strip it down today, but something has come up, I will measure with drop links then remove them and measure again

I know have put some weight on, but I didn't think it was that much:) I have measured all wheel centres to the wheel arch, the rears and drivers measure the same, put passenger front his higher

I was between speed bumps when it went bang, mines a 53 reg, I will check the length of the links tomorrow. Thanks for the replys

Thanks James, It's going in for it's MOT next week, so trying to get it sorted ready. If the roll bar is solid, would that mean the bushes have gone?

Will try and disconnect them tomorrow and see if it will rotate. The car does look higher on the passenger side.

On my way home tonight, there was a loud bang in my front passenger wheel arch. After inspecting it it seems to have bent the new drop link near the top. Before I changed the drop link the ride height on the passenger side was 10mm higher than the drivers side. I replaced both sides last week...

Hi, Is it still for sale Rob

Would this cause the ride height to be different? My passenger side is 8mm higher than the drivers after replacing the droplink on my passenger side about 6 months ago, and as started rattling again.

Hi, Is it a 2a or 2e, also does it have a dash switch Rob

You can buy a sticker/ adhesive remover from machine mart, its a rubber wheel that goes on a drill, and it just rubs off. I have used it to remove sticker from my car, also adhesive strips left on friends cars, when they have removed bodykits link below...

Actually they don't look that bad, I'd leave it like that, if it does that to mine.

Bumpers look great, been looking for pictures, before attempting mine. :) I would use some high fine grit wet and dry paper to blend in the patches then put a few light coats of laquer over the top.

Received the kit this morning also, looks great. Also I work as a welding inspector, and a work mate is an ex welding teacher and we both agree that the welding is to a very high standard. I am very pleased with the kit and would recommend this to anyone. Thanks alot Rob

Payment and PM sent. Thanks Rob

Can you put me down for kit also. Thanks Rob

On the front side windows there should be some etching, if it says AS2, you can't tint them, thats the max that they can go. Usually the windscreen is AS1. Rob