Recent content by paul grange

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. paul grange

    Quick question about toe in/out

    All done now Uesed the string around car and tape handling so much better ☺
  2. paul grange

    What have you done to your Landie today.

    Tyre rotation Sorted out my toe out problem And test fitted a new intercooler but its not going to fit ...back to the drawing board....anyone fitted a ebay intercooler ?
  3. paul grange

    Quick question about toe in/out

    Yes mate 100% I had it tracked about 2 years ago only notested it with my new tyers (6 months old) Ive done lots of motorway miles in that time Cant say i notested any handling probs I will adjust then go on a motorway run c ive anything changes:-)
  4. paul grange

    Quick question about toe in/out

    Thanks guys ill c if i can adjust tonight .Wheels on the ground? .wheels off the ground on axle stands? Witch one will b best ?
  5. paul grange

    Quick question about toe in/out

    Hi all quick question The inside tread of my front tyres are wearing faster than the outside So i done the string test around the tyres and with the driver side front and back tyres inline the passenger side tyre was pointing outwards like this .... \===| |===| by about 12mm .is this to...
  6. paul grange

    Temperature gauge question!!

    I took the old thermostat out and it was a 82° and the one i replaced it with was 88° Got it from euro parts Like i said it always ran abou half way on the gauge now its 3/4 .
  7. paul grange

    Temperature gauge question!!

    Hi all If i was to fit a vdo temp sender do i have to fit a vdo gauge or will it work with any arftermarket gauge ? Thanks Second question... i fitted a 88° thermostat to my defender 200tdi it had a 82° one in and the temp stayed at half way now its sits 3/4 the way ..dose that sound right ??
  8. paul grange

    Vdo temp sender???

    Got a defender 200tdi And want to fit a vdo temp gauge Looked about and i can see the mod by drilling and tapping the old sender to fit a vdo one to match the gauge But i have found this and wonderd if this will b ok as a straight swap part number 323-801-001-008n Look at this on eBay...
  9. paul grange

    How was the show guys!!

    Hi all I couldn't make it to the show at kelmarsh this year I was wondering how you found it compered to billing last year ??? Was there many defender parts about ?
  10. paul grange

    200tdi water pump ..

    Like it !! Straight to the point Thank u
  11. paul grange

    200tdi water pump ..

    Hi all defiantly the water pump Got the fan of (left hand thread) next question is are the 4 pully bolts left hand aswell ?...
  12. paul grange

    200tdi water pump ..

    Hi all just come back from a long trip lots of motorway miles My 200tdi almost hit red on the temp 60-70mph it norman6ly always sits a third of the way I lifted the bonnet to fined water dripping down the back of the water pump ..dose this meen my pump is bad ..plus the coolent looked abit...
  13. paul grange

    Bulkhead removal bar !!

    I think u r talkung about a full bulkhead removal bar ... Im talking about half removal bar like this
  14. paul grange

    Bulkhead removal bar !!

    Hi all I was looking into getting a bulkhead removal bar just the top bit not the hole thing but money is tight so was thinking of making one . I looked about at some and was amazed that it was just 2 bits of angle pop riveted together So ive come up with this frome some scrap i had at work...
  15. paul grange

    6ft + defender owner's read this !!!

    No all i hat to do was adjusted the rear view mirror a bit
Back
Top