Recent content by patsull

The original diff was replaced as a bolt broke off inside and blew a hole in the casing, replaced the mounts as I thought it was best as was all off anyway will have a check through the rest of the drive train to see if anything else is fooked which could have caused the diff failure in the...

Good morning all I have a 2005 td4 sport ,Upon hearing a thud every time I pull away had a look underneath to discover that the two bolts top and bottom of the diff mountthat attach tot to the diff had become loose.the top one tightened ok but the bottom one appears to have broke off inside...

Hi all may sound a silly question on my recently bought freelander I've notice although there both Pirellis on the front ones a scorpion and the other is an str. Is this ok to run as I've read it can cause problems if not the same make as profiles from diff manufacturers can vary slightly but...

Hi all have been in the wilderness for a couple of years since selling my td5 disco but am now back with a freelander 1 facelift model which I bought recently this forum has already been a fountain of knowledge for things to look out for basic maintenance ect the vcu debate seems to bring up...

Windscreen seems not to be leaking now but water is still coming in between inner and outer skin at bottom corner of door by footwell. After taking the hose off the screen it still keeps coming in for a couple of mins afterwards and also through the wires that go through to the drivers door by...

Thanks for that gents their out this morn to rectify, can seen by the link that sierrafery sent that the rubber isn't in the corner as it should be third time lucky !!!

Hi all have had my screen on my disco replaced last week auto windscreens fella said it was leaking for some time corrosion in certain places ect but didn't say it was serious. Next Lot of rain water was dripping from headlining so was called again and replaced next bloke said screen wasn't...

Evening all, have a 2004 Disco that's been running very sluggish at low revs ten bursting into life at about 1800 rpm. After reading some of the threads on here have disconnected the MAF and it appears to be running alot smoother thank before so I am assuming that the maf is faulty.just wanted...

thanks for that Optimus,been driving me mad as can see the water coming in by bottom of rubber but couldnt see how i take it reseling the winnscreen is the wa to go

Hi All, founding I've got some water coming in on the bottom of my drivers door on my 2004 discovery. Thought it was the door rubber do changed that but still no joy. Anyone got any idea how the water is getting in as there doesn't seem to be any water running down anywhere. Many thanks for your...

Hi all new member just bought my first land rover a 2004 discovery looks like this is the place to be for expert advise and tips on troubleshooting ect ( hopefully I won't need this to often :-) )