Recent content by P38Rangey
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
P
Yes but they fail to mention the bottom O ring that Turners liners have that seals the bottom of the liner....
-
P
An engine builder showed me how to remove the spring from the seal and shorten it a few mm then refit it. It makes the seal that tighter bit fit around the crank keeping it sealed longer. Has worked for me ever since.....
-
P
Have you got it back on the road yet?
-
P
That coffee cup must be up there with the accidental discovery of Penicillin!! :)
-
P
Did you ever cure this problem?
-
P
Hi
What special tools do you need besides the press?
-
P
I've just replaced the two long pipes that feed the back brakes. The pipe that goes over the petrol tank etc to the far side can be replaced without having to remove anything on the veichle. You will need some replacement pipe clips though as you will break some getting the old pipe out. (they...
-
P
Brake pipe is 3/16 and the connectors to the flexi pipes etc are 10mmx1.00mm pitch. UK spec.