Recent content by Mrfulwell

Adjusting the size of a wheel on any car can affect the way the suspension works, negative camber, toe in/out etc etc, it can cause extra strain on driveshafts/cv joints due to larger rolling radius. When you fit different wheels you should always have the tracking re set on your car.

If they came from the factory with 18 inch rims fair enough, the facelifted freelanders look kind of ok bit if your just going to whack a set if 18's on a mk1 with no suspension mods well your asking for trouble, as for 22's On a freelander....... Don't be ridiculous!

Extra strain on suspension components as there designed for the original wheels not larger ones, speedo calibration would be thrown out due to larger rolling radius of bigger wheels, not sure if the Disco/rangie stud patterns are the same and as a fellow freelander owner don't do it, get some 15...

You should change the guide pins first and see if that helps before replacing the caliper. The seals on them perish and allow water in which causes then to seize into the caliper. You can get replacement guide pin kits on flea bay and there simple to fit. If the pins are seized use loads of WD40...

Whoever fitted your tyres is a total bull ****ter. As a tyre fitter myself I have never heard of over inflating to stop a wheel leaking at the beads. The tyre should have been stripped, cleaned up and then sealed with bead sealer. It may feel fine at 36 psi bit the long term effects of over...

Mud in a can! Im going to patent it and make a million of the tratter boyz!

not a concern just an experiment!

Big enough to sit on your face!

Careful storm my Nan would beat the **** out of you.

So by that definition my Nan is gay because she has a blue rinse. Tratter boyz.......can dish it out but can't take it.

:hysterically_laughi

Is Oddie your fella?

I doubt it but it's the little victories that count!

Nice range rover hippo bet it cost an arm and a leg!

Spotted this on the drive down to Cornwall. Guess your not a real man until you slap Disney stickers over your motor......