Recent content by Monty4RT
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
M
Is it much of a job to change the thermostat on my 2000 4litre v8 discovery ?
-
M
Starter not turning , think its been a bad connection as i have stripped the connections and cleaned them , seems to be working now . Many thanks for your help
-
M
Yes I have lost it !!! will i be able to see it from above or will i have to get underneath ?
-
M
Can anyone help me locate the starter motor on my 2001 Disco V8 ?
V8
-
M
you have checked the fluid level ? mine sticks when the fluid level is low
-
M
Has anyone got experience of the plastic outer wings that are available from parts suppliers or should i just bite the bullet and get an alloy one ?
-
M
The 88 will take a bike rack no problems , be very carefull when choosing a bike rack . Its worth paying a few quid for a quality biy of kit Dave Cooper is generally regarded as making the best .
Bike Racks & Trailers Supplier UK - Dave Cooper
-
M
You have checked the fluid level ?
-
M
Thanks guys , I didnt realise the spring pads where seperate from the axle ,I ground the the heads off the bolts and the pad came loose and the studs came out of the bottom of the plate
-
M
Thanks , time to get the taps out :mad:
-
M
Just been inspecting the rear suspension on my 94 90 300TDI , im a bit concerned as the metal strip that holds the spring on to the axle has completely disintegrated due to corrosion . It looks like the bolts have gone the same way as well . Are these strips essential , or can they be forgotten...
-
-
M
This is the linkage that connects the hi low selector lever to the diff lock, all the pivots are very worn and I would like a new one . Anyone know the part number ? It is 1994 300tdi 90
-
M
Thanks , just pulled off the front propshaft and the uj at the transfer box is completley gone :)
-
M
I am wondering if i took the rear propshaft off and locked the diff , drove it up the road would this prove if the shaft was knackered ?