Recent content by Mattc90
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
M
Sorry new crank sensor wiring cut from one at a breakers I have have just put another cranksensor i had on and reset codes and it seems OK at the min so fingers crossed its OK now
-
M
Sorry to bring up old thread but have the same thing happening on mine new crank sensor + new crank wires but still happening these where the fault codes
-
M
Hi Sierra Ferry I did come across this yesterday but I don't understand it
-
M
I'm in Hampshire just out side Basingstoke
-
M
I don't know any one with it im afraid
-
M
is there any way to convert my 6 digit key code to the long type so I can use hawkeye to program it
Thanks
-
M
Hi I will have at the Dakars thanks building more for pay and play when there open than lanes but thanks for the replys
-
M
hi all sorted thanks to seirra Ferry it was the ace ecu not allowing to it unplugged that and it worked im going to do a ace delete thanks you for your replies
-
M
hi just wondering if anyone could help new to off roading
Just wondering what views are on insa turbo specal tracks or cts landdraggons 265 75 16s which are better
Intending of building my d2 for laneing and pay and play days
Thanks matt
-
M
I have re proceed it had to do throttle and injector codes as well but is all running
-
M
Yes definitely a challenge thanks so much for all your time and help
-
M
Hi yes all done and coded it is the ace ecu which stopped it I have a leak on the ace and am removing it anyway and putting back to standard anti roll bar thank you for all your help
-
M
Hi it connected after i unplugged another ecu could you tell me what order I program them in
-
M
Ok I will try that can I unplug all the rest and just try ecm and bcu
-
M
Hi happy new year I have double checked
I have continuity to bcu and ecm
11.5 volts from pin 16 to earths on obd
And 11. Volts on bcm plug