Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    Discovery 2 TD5 cuts out at 3000rpm

    Sorry new crank sensor wiring cut from one at a breakers I have have just put another cranksensor i had on and reset codes and it seems OK at the min so fingers crossed its OK now
  2. M

    Discovery 2 TD5 cuts out at 3000rpm

    Sorry to bring up old thread but have the same thing happening on mine new crank sensor + new crank wires but still happening these where the fault codes
  3. M

    Land-rover discovery 2 key programming

    Hi Sierra Ferry I did come across this yesterday but I don't understand it
  4. M

    Land-rover discovery 2 key programming

    I'm in Hampshire just out side Basingstoke
  5. M

    Land-rover discovery 2 key programming

    I don't know any one with it im afraid
  6. M

    Land-rover discovery 2 key programming

    is there any way to convert my 6 digit key code to the long type so I can use hawkeye to program it Thanks
  7. M

    Insa special tracks or cst land dragons

    Hi I will have at the Dakars thanks building more for pay and play when there open than lanes but thanks for the replys
  8. M

    Discovery 2 td5 can't communicate with ecus

    hi all sorted thanks to seirra Ferry it was the ace ecu not allowing to it unplugged that and it worked im going to do a ace delete thanks you for your replies
  9. M

    Insa special tracks or cst land dragons

    hi just wondering if anyone could help new to off roading Just wondering what views are on insa turbo specal tracks or cts landdraggons 265 75 16s which are better Intending of building my d2 for laneing and pay and play days Thanks matt
  10. M

    Discovery 2 td5 can't communicate

    I have re proceed it had to do throttle and injector codes as well but is all running
  11. M

    Discovery 2 td5 can't communicate

    Yes definitely a challenge thanks so much for all your time and help
  12. M

    Discovery 2 td5 can't communicate

    Hi yes all done and coded it is the ace ecu which stopped it I have a leak on the ace and am removing it anyway and putting back to standard anti roll bar thank you for all your help
  13. M

    Discovery 2 td5 can't communicate

    Hi it connected after i unplugged another ecu could you tell me what order I program them in
  14. M

    Discovery 2 td5 can't communicate

    Ok I will try that can I unplug all the rest and just try ecm and bcu
  15. M

    Discovery 2 td5 can't communicate

    Hi happy new year I have double checked I have continuity to bcu and ecm 11.5 volts from pin 16 to earths on obd And 11. Volts on bcm plug
  16. M

    Discovery 2 td5 can't communicate

    I have been trying to get it going for around a week now
  17. M

    Discovery 2 td5 can't communicate

    Still the same and yes battery is getting to the point it needs recharging again
  18. M

    Discovery 2 td5 can't communicate

    Hi sorry rechecked and found it I have 10.7 volt on both
  19. M

    Discovery 2 td5 can't communicate

    I'll take a pic and up load but almost certain there isn't a green and blue on that plug
  20. M

    Discovery 2 td5 can't communicate

    Will it make a diffrance mine is 2000 reg
Back
Top