Recent content by matacaibo

And just where are you going to Bug Out too in our overcrowded Island ??

Haven't been able to do much recently with this little project but have got a couple of powder coated ones and a few bare metal ones left, PM me for details & prices, won't be having any more made so its your last chance to get an "original". They are only suitable for TD4's.

Thanks for that, hadn't even noticed it, will be extending it tomorrow ;)

Thats the IRD breather, not the same box or fluid, just curious because haven't noticed a breather on my Jatco box

Where exactly is the fluid coming from, to my knowledge Jatco box doesn't have a breather

I would check your PCV valve isn't stuck, it should be open at low loads & close off when the induction pressure exceeds the crankcase pressure, if its stuck closed you will have problems at idle / low loads, if its stuck open you will have problems when the boost pressure increases. Also check...

Loads of peeps will tell you what a Hippo can't do & what you musn't do but most of them have never driven one off road, I would recommend larger AT tyres & a 2" lift, some underbody protection at least a sump guard & go & embarass your friends in their Disco's, lol ;), I've snatch recovered a...

Thanks.:)

The thing is the fuel gets fairly hot when it passes through the injection pump & the pressure control valve is on the outlet of the pump. Parked on the M25 on a typically blistering summer day (lol !) at idle for long periods where most of the fuel is going back to the tank it might be an...

It actually cools the fuel being returned to the tank from the injection pump, not sure what the temperature rating is for the Freelanders plastic fuel tank

No its designed around the Warrior winch, the only other short drum winch I know of weighs about 13 Kilos more than the warrior, believe me it is very important to keep to the weight down when its this far forward of the front axle line & above the hub centres. Its a Freelander not a Defender lol

You'll be back ... you know you will ..... the lure of the bacon butties will be too much ;)

Just took delivery of 10 new brackets, very slight change in lightening cutouts shapes & sizes, strength increased by 50% !!!!, weight reduced by 20% but more importantly price reduced by 50% to £180 !!!!!, will be listed on ebay from Tuesday 8th July

My advice is stick with it, think about your design carefully, make a prototype & test it thoroughly & if you are absolutely sure its fit for purpose & you get enough interest have a batch made & sell them. Don't need to tell you what the consequences of a failure of this part would be. Be...

Winch Bracket + Warrior Samurai SD 9500 SR Winch Now offered complete with new style Warrior Samurai SD 9500 SR Winch at £690 + p&p