Recent content by mallee42

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. mallee42

    Disco 1

    I'm sure my brother put RR classic seats into his disco 1, I will check
  2. mallee42

    Cyclone valve in rocker cover

    Thanks, today was the first test run since the new cyclone valve fitted and it seems a lot happier....so far...;)
  3. mallee42

    Mallee42

    Hi, and thanks.
  4. mallee42

    Cyclone valve in rocker cover

    Hi to all, I have been looking at various threads and can't find anything really specific about this black plastic device. My saga started in october on 300tdi disco 1 1994 when the turbo failed after coming home from whitby. Oil loss and smoke everywhere, grey white in colour and a really bad...
  5. mallee42

    blue smoke on start up

    Been going through something similar with my '94 disco 300tdi, faulty head gasket and turbo, now just burns oil when working hard and seems to pressurize the sump. After a while it is ok again. I am now replacing the cyclone. Have you checked intercooler and cleaned in case any residue is left...
  6. mallee42

    Do polyurethane bushes require preloading?

    Hi, I changed mine on the back of the 300tdi disco 1 and lowered it to road before tightening fully, and it is fine. I assume you are talking about pre-loading the old matallastic ones?
  7. mallee42

    300tdi under dash fuse box, electric windows, central locking issue

    common areas are where the wiring loom goes through the door pillars to the doors. the fuses are sometimes labelled on the lid of the fuse box and a good tester is the pen style led device that has a wire on the other end that fastens to chassis or ground then touch the probe to the fuse exposed...
  8. mallee42

    What have you done to your Landie today.

    Refitted a new gasket to the turbo drain hose and have ordered the breather pipes and cyclone valve from island 4x4
  9. mallee42

    Mallee42

    Hi to all, I have visited here many times as a guest and stolen all your advice and passed it off as my own of course.... ;) Thought I had better join as I may remember something useful one day! I have a Discovery 300tdi 1994, series 3 lightweight and a 2a swb plus lots of fixing stuff...
  10. mallee42

    Hand brake sticking on

    strip it as above post, oil the cable as in the other post, then leave it in gear and with a brick under the wheel.....
  11. mallee42

    oil level

    Hi, if the light is working, but I suppose it is on at start up? 20/50 is for most older vehicles and can't remember now if any difference for petrol or diesel...old age affects the wassaname...erm fingy
Back
Top