Recent content by Laim Sykes
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
L
Hi td4van
Thanks for info
Went to do door card and found it very easy to do.these are the steps i used if anyone is intrustf
1 pull tweeter square off
2 take off silver trim undo three screws
3 undo little screw behind door pull and feed it though handle
4 undo 2screws each side of door holder
5...
-
L
Hi nodge68
Thanks for info so how do i take cards off as my has silver long bit on handle but cant see any screws in where you open door from inside so how can you do it
-
L
Hi td4van
Thanks for that but you said a few screws my has a silver trim on handle and no screws in door handle by this what you use to open doors
-
L
Hi Nohair
had my abs light on for a couple of weeks took it to my local garage they put it on there dianostics machine came up with no faults and just reset the light have now been driving and no problems
-
L
hello all
sorry if this has been said before I have freelander 1 2005 1.8 petrol Facelift Model the problem iJhave is that All the speakers have gone only the tweeters work. someone said to me could be the amp i have looked under both passgener and drivers seat cant find any amp also could...
-
L
Hi Nodge
turn out to be the back box
just shows you that getting it checked out at differant places on the exhust system is worth it
Thanks
-
L
Hi Nodge68
just a headsup took freelander to garage turn out to be the ac compressor
and all done now
thanks for your help
-
L
Hello all
I have a
Freelander one 1.8 petrol 2005 reg
And if someone could help
I want to which type of catalyst converter the vin number begins with SALLNABA
Thanks
-
L
hello all
i was wondering if anyone has a full exhaust system for a freelander 1 the year is 2005 petrol 1.8
for sale and a crankshaft pulley if this is the wrong place could some one put it in the right place
thank you
-
L
thanks NODGE68
its a 1.8 petrol manual 2005
-
L
hi all
i was wondering if someone can help me the problem i have is the crankshaft pulley becomes very hot after just starting up and it is burning the fan belt i dont wont to drive until i get some advise
thanks
-
L
Hi Htr
Thanks for picture very helpful sorry to get back to you so late been away
Thanks
-
L
Hi nodge68
The reason for change is that I won't to change because I don't no if it has been changed before as only have brought the car recently
And the hoses look old and the thermostat is a black colour not white colour as the new one looks
Thanks for your reply
-
L
Hello All
Could Someone Piont me in the right direction
I have a freelander 1 2005 with upgrade kit PCH001190 all ready on it i want to change this for a new kit but have read in the advertisment that i will need backing plate PEL000040 but i think this is what you want if you are changeing...
-
L
hi skinny mike
thanks for info i was surprised as well
Thanks