Search results

Hi td4van Thanks for info Went to do door card and found it very easy to do.these are the steps i used if anyone is intrustf 1 pull tweeter square off 2 take off silver trim undo three screws 3 undo little screw behind door pull and feed it though handle 4 undo 2screws each side of door holder 5...

Hi nodge68 Thanks for info so how do i take cards off as my has silver long bit on handle but cant see any screws in where you open door from inside so how can you do it

Hi td4van Thanks for that but you said a few screws my has a silver trim on handle and no screws in door handle by this what you use to open doors

Hi Nohair had my abs light on for a couple of weeks took it to my local garage they put it on there dianostics machine came up with no faults and just reset the light have now been driving and no problems

hello all sorry if this has been said before I have freelander 1 2005 1.8 petrol Facelift Model the problem iJhave is that All the speakers have gone only the tweeters work. someone said to me could be the amp i have looked under both passgener and drivers seat cant find any amp also could...

Hi Nodge turn out to be the back box just shows you that getting it checked out at differant places on the exhust system is worth it Thanks

Hi Nodge68 just a headsup took freelander to garage turn out to be the ac compressor and all done now thanks for your help

Hello all I have a Freelander one 1.8 petrol 2005 reg And if someone could help I want to which type of catalyst converter the vin number begins with SALLNABA Thanks

hello all i was wondering if anyone has a full exhaust system for a freelander 1 the year is 2005 petrol 1.8 for sale and a crankshaft pulley if this is the wrong place could some one put it in the right place thank you

thanks NODGE68 its a 1.8 petrol manual 2005

hi all i was wondering if someone can help me the problem i have is the crankshaft pulley becomes very hot after just starting up and it is burning the fan belt i dont wont to drive until i get some advise thanks

Hi Htr Thanks for picture very helpful sorry to get back to you so late been away Thanks

Hi nodge68 The reason for change is that I won't to change because I don't no if it has been changed before as only have brought the car recently And the hoses look old and the thermostat is a black colour not white colour as the new one looks Thanks for your reply

Hello All Could Someone Piont me in the right direction I have a freelander 1 2005 with upgrade kit PCH001190 all ready on it i want to change this for a new kit but have read in the advertisment that i will need backing plate PEL000040 but i think this is what you want if you are changeing...

hi skinny mike thanks for info i was surprised as well Thanks

hi Nodge68 Thanks for reply just wondering is there any pictures of this bleed screw as i dont wont to undo the wrong one Thanks

hello to all this is my frist time here i was wondering if there is any thing else i need to change the cooling hoses with thermostat i have a 2005 1.8 petrol which has the upgrade thermostat also can someone tell me where the second bleed screw is i can see the heater bleed screw thanks