Recent content by lagpunktortoni

I've had no issue with the area round the plastic trims on my XS. Just the usual rust on the arches inside the rear doors and the area surrounding the boot floor.

Went to use 300Tdi brakes yesterday and pedal stuck solid part way down with no braking. It worked when I released it and tried again but repeated it a few seconds later. Seems ok up and down the drive today. The pump was replaced a couple of years/ 12000 miles ago and doesn't seem to be...

I thought somebody must have seen it :D

Has anyone seen this Defender 230 :eek: on ebay. Can't see any mention of it yet. Wouldn't want to offroad it would you... LANDROVER DEFENDER 300 TDI AUTO STRETCH LIMOUSINE LIMO on eBay (end time 22-Apr-10 11:12:17 BST)

I've carried out the bit of wood mod myself in the past - Ive gone with a lump of rubber upgrade this time!! Also had to replace the broken spot welds on the regulators with (very short!) bolts. When apart you could see only one of the spot welds had penetrated hence them breaking. Need to...

I came across an easy solution as my hands were too big for it - get the wife to do it :p. The seat definitely caused most of the problem. The number of times I've changed bulbs I should have taken the seat out!

I think cutting through them is the easiest way. I had same problem with a Mondeo; they are notorius for it. They cut surprisingly easily with a hacksaw - when cut near to the hub try and split with a hammer & chisel - they should just fall away.

Someone had glued mine back on as well. I found out when driving through a town in Wales and suddenly I was driving through a cloud of steam. I had no tools so called the breakdown - an old guy came out and simply screwed a bolt into what was left of it. Got me back to Newcastle:) That was...

I seem to get about 23 mpg round the houses - I can travel the 12 miles to work without hitting top gear ie I never top 50 mph (or at least I could until I was made redundant on Friday but thats another story!!). My Dad runs a Mitsubishi Shogun Pinin petrol auto. He complains of only getting...

Penny trick worked on mine. It's so fast to do it's worth a try. Two minute job.

I removed mine from above - those instructions on the link sum it up pretty well. I have the Defender solid front pipe so not very accessible from below.

Similar noise from mine was a rear shocker - worth a check! Had me puzzled for a while.

Don't think I'm far off the passenger seat access myself - there's a definite knack to opening the door!! Incidentally the handles are the same ones as my first car (a 76 Morris Marina) had - parts bin engineering:D

Fitted a new serpentine belt, cleared the gunge out of the non- working windscreen washer and best of all - stopped the rattle thats been driving me insane for the last 18 months:D. Sounded like it was coming from inside the dash but in fact was part of a steel channel behind the engine touching...

1. Got it MOTed - it passed without even an advisory:D:D. Smoke test way down on last year. Not bad for 12 years old and approaching 150k. 2. Gone to take serpentine belt off to investigate the noise that started recently and realised straight away that the belts well past it's sell by date -...