Recent content by Jamie2126

Sound like one of the sensors isn't working. Turn the ignition on to position 2 (engine not running) and place car in reverse. Listen to each of the sensors in turn. They should make a clicking sound. If any are silent then its faulty and needs replacing.....

Hi Chaps, Not sure if anybody come across the problem I've currently got ? Coming home from work I noticed that the engine started to splutter around 3000rpm on the motorway. Putting my foot down stopped this, but when my foot was taken off the accelerator there was a loud pinking sound from...

Hi - this looks like the front mount for the diff. ( which I've just replaced) ?? 30 minute job to do it yourself - bit fiddly. Remove the center bolts on the LHS & RHS mounts (Support the diff with a jack as it helps to remove/refit the bolts). This will give you a an extra inch or so when...

Thanks - I'll check that tomorrow when I have some light. Just seems fuuny that there was no noise before i replaced the mount..

Hi - Hope somebody can help out on this ?? I've just replaced the front mount on the rear diff. I removed the center bolts on the LHS & RHS mounts to do this. The new mount is now in place and all bolts re fitted. Just went for a test drive and I now have a wheering/grating sound coming from...

Hi - thanks for the quick response. Do you know where I could source mod kit ???

Hi - Can anybody shed any light on what could be causing this issue ? I have a FL TD4 '05 plate. About 3 months ago the engine management light was displayed when 2000rpm was reached and there was no power beyond that. I replaced both fuel pumps, filters and cam sensor and it seemed to have...

owwwccchhhh !! just called LR and they quoted £77 + VAT!! Anybody recommend an aftermarket retailer who sells these ?

I think you left the details back in the rocket !!! Can you retry ?

Hi - do you know hat the refering LR colouring is ie green/red - white ? etc

Hi, thanks for the fast responce. The LR part is this the connector only or the cable as well ? Jamie

oppps, pics too big .

Hi all, Can somebody advise on a little problem I have. I have just fitted a tow bar to my Freelander. I have located the plug point behind the O/S/R panel pic #1. On inspection of the plug, they is a blank connector on the side of the block - see attached picture. Is it possible to buy...