Recent content by Felix

So if all the other stalks, indicator, wipers and washers etc work it would indicate that the serial link between the instrument pack and the BeCM works ok. So either the pack is not sending information about the trip button being pressed or the BeCM is not returning the information or I guess...

Found this. Dunno if it helps me or not as haven't full looked at it but interesting none the less. http://jimsrover.afraid.org/rover/gtr_references/BeCM_SID/BeCM_SID_Vol_1.pdf

Hi Had a look through all the pinout I can find for the BeCM but can't figure which one takes the control from the stalks to bring up the trip computer info. Trying to see if its the same plug that is related to my no existent sunroof message. Anybody have this info or a link? I have been...

Ok. Had the car up to landrover place but they could not get the T4 to talk to it. Even tried putting the becm in another vehicle. Is there away to reset it or something? There main wiz guy wasn't there at the time. F.

Addendum to this: At the same time the NSR side light blew and the trip computer no longer works. I assume this is all related. Probably to the bulb going. F.

Weird. Thought I had done that. :D F.

Great!! Another trip to the Indy Specialist then. Last time he was there he jokingly suggested I buy a Testbook. It would seem P38s should have come with one as part of the tool kit. F.

Any ideas ladies and gents? Sunroof not set dash message but I don't have a sunroof. :confused: F.

Quite right. Had to have the guy out from LR to resync. Worked straight away after. On the plus side he said he had never seen that problem before so maybe its not as common as you would think after reading this forum. Would defo buy one of those SyncMates now and get new RF reciever as thats...

Came out this morning and engine turns over but wont fire. Battery was low so connected spare battery but still the same. Have been getting flat battery after leaving it for a couple of days so assume it has RF problem. Quite stuck now as its blocking my drive way. Glow plugs get power and can...

Excellent news. Yey the forum! F.

Lolz! My missus often leaves it in D. Gives me nasty sinking feeling when I get in and it does nothing. Clock through all the nasty P38 supprises until I finaly notice. F.

Did you actualy touch the bonnet when it stopped? Could be the "bonnet open" switch> Known to be iffy and cause problems. Or I guess it could still be that anyways if you didn't. F.

If you can't see it maybe that's why it doesn't work. It is quite far around but I don't think its attached to the same actual piece of metal as the seat latch. The aerial wire is definetely no long enough to be out of site and still attached. F.

FYI - You don't have to remove anything to see if the RF aerial is connected you can see it through the hole where the back seat latches. Its right off to the left at the same height. You will need a torch to see it. If you had long enough pliers you could even plug or unplug it through the...