Felix
New Member
- Posts
- 63
- Location
- Dunfermline, Fife, Scotland
Any ideas ladies and gents?
Sunroof not set dash message but I don't have a sunroof.
F.
Sunroof not set dash message but I don't have a sunroof.
F.
Sunroof not set - erm... I don't have a sunroof
- Thread starter Felix
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JohnP38
Active Member
- Posts
- 619
- Location
- Alton Hampshire UK/Cape Town SA
The setting in the BECM probably says that you do.have the BECM settings read to see.Any ideas ladies and gents?
Sunroof not set dash message but I don't have a sunroof.
F.
roddy4
New Member
- Posts
- 664
- Location
- banbury,oxfordshire
it is a p38,i could live with that lolThe setting in the BECM probably says that you do.have the BECM settings read to see.
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
Time to get your cutter out and fit one thenAny ideas ladies and gents?
Sunroof not set dash message but I don't have a sunroof.
F.
adamrharding
New Member
- Posts
- 264
Need a piece of software/hardware to reset this setting on the BeCM, one quick trick to reset the whole BeCM is to disconnect the battery, following official procedure, wait 30 minutes and reconnect. This allows the BeCM to lose all battery power and resets on startup. If this fault is new then will work fine.
Datatek
Well-Known Member
- Posts
- 45,024
- Location
- Near Poitiers SW France
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
More than likely as previously posted, selected in the Becm. Easy Peasy to remove the option using P38 diagnostics in the Becm settings,
Felix
New Member
- Posts
- 63
- Location
- Dunfermline, Fife, Scotland
Great!! Another trip to the Indy Specialist then. Last time he was there he jokingly suggested I buy a Testbook. It would seem P38s should have come with one as part of the tool kit.
F.
F.
- Posts
- 83,296
- Location
- Embasinga stocæ
there are other options to the testbook - :search: for faultmate.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
We don't ask for your location 'cos we're coming round to nick your motor, it's because someone local may be able to give you a dig out and save you some time & money.
:mil36:
- Posts
- 83,296
- Location
- Embasinga stocæ
Felix
New Member
- Posts
- 63
- Location
- Dunfermline, Fife, Scotland
Weird. Thought I had done that.
F.
F.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
I know "TAKdriver" has a Faultmate and some software modules. May be worth sending him a PM. He's based in Midlothian area.
Felix
New Member
- Posts
- 63
- Location
- Dunfermline, Fife, Scotland
Addendum to this: At the same time the NSR side light blew and the trip computer no longer works. I assume this is all related. Probably to the bulb going.
F.
F.
magictiny
New Member
- Posts
- 435
- Location
- Billingshurst, West Sussex
BECM issue for sure
Felix
New Member
- Posts
- 63
- Location
- Dunfermline, Fife, Scotland
Ok. Had the car up to landrover place but they could not get the T4 to talk to it. Even tried putting the becm in another vehicle. Is there away to reset it or something? There main wiz guy wasn't there at the time.
F.
F.
Any ideas ladies and gents?
Sunroof not set dash message but I don't have a sunroof.
F.
:hysterically_laughi
Similar threads
