Recent content by CUFFY

Hi i went on the forum as i need to replace my swivel seals and sort out an oil leak from my steering box on my defender. When i went onto your pages they are all still there but the pictures are not showing because of a 3rd party host. I put a help post on today and got a reply to explain what...

Thanks for that, really appreciate the reply and the explanation. I would have spent ages trying to sort this out. I'll contact buster direct

hi Just went onto busters tutorial as i need to replace my swivel seals. When i went on all the pictures from 2010 backwards they have an image of 3rd party hosting update your system. The tutorials in 2011 are ok Anyone have this problem or is it my iPad

hi I know this repeats time and again, but are there good RELIABLE mechanic out there that would help me with my defenders I have a td5 and a tdci that I am upgrading and keeping going.Dave

can anyone help i have a 2000 td5 90 and updating the center console to a raptor console with carling switches. i am wiring in front spots and a rear work light but would like to transfer the existing wiring for the hazard and wiper to new carling switches. does anyone know which switches will...

just wanted to thanks for all the post i replaced all 4 ujs and problem solved

hi im from hatfield peverel near chelmsford essex. i've been a member for a couple of years now but not done much on the forum. i have 2 defenders a td5 90 hardtop and a 110 td5 double cab.my theory is i can work or have to work on one and still have one to drive.currently rebuilding all 4...

i have a 90 td5 2000. i have rebuilt all 4 corners with new springs, shocks, grooved discs, calipers,green stuff pads, complete poly bush set, wheel bearings,front swivel housing with bearings,steering shock and hd steering arms with track rod ends. put it all back together got a new mot but...

i do have a lovely set of 4 silver zu 's that i currently have on my 90 that are due to be taken off. if you are still looking send me you mob or email and i can send a photo. i am quite happy to arrange them to be packed up and couriered as i have the boxes for the black mach 5 i am replacing...

i purchased a s/s mid pipe replacement pipe from paddock and went to put it on and it didnt have a flush fit on the cat pipe when i looked at the new mid pipe and the existing mid box the pipes are different size. the existing mid box pipe i/d is 61mm and the new pipe is 57mm and the outer...

hi sorry forgot to thank you for info when i checked i did have the early thick one. the company i brought it from showed no difference and only sell the thick one and show no second one for the later model.

would the shaft pull i didnt want to yank to hard or would i need to take the hub off and stub axle and then reassemble with the cv butted to the stub axel.

mine is what ever was standard on the td5 havent change the cvs i have rebuilt the hub, new bearings swivel cups discs and calipers but the have shafts and cv were fine and thought i would finish off with some hd flanges

may be a stupid question. i brought new hd flanges for my 2000 td5 90 but when fitted i cant seem to pull the half shaft out far enough to get the c clip on i have put a but in the end of the shaft to help pull but does not want to pull out.do these flanges need longer half shafts or what am i...

Hi i am really keen on getting a rev counter for my td5. I have read all your treads and am interested in buying your adaptor to fit a standard rev counter. Do you have an adaptor to sell me. Dave cuff 07866678840 [email protected]