Your biggest fanny around

Having done some work on both the P38 and the Classic and today having fannied about with the sunroof headlining panel for the better part of a couple of hours (dark stopped play) it got me to thinking..

The rave manual puts this as a simple task a couple of straightforward steps.. but ohhhh noooo ! never is that way.. it out annoys putting the sodding link rod end clips on the door lock mechanism and that caused a lot of 'grrr-ing'

So what's the biggest fanny about for what appears to be a s simple job that you've come across or had to endure on the range rover ??

None all the jobs are very easy.

raise:

Well get yer northern backside down here and do my sunroof headlining panel then

ukadamwest said:

raise:

Well get yer northern backside down here and do my sunroof headlining panel then

Click to expand...

Will be doing mine when weather gets better. Or when the time comes i can get enough **** out of the garage to get the car in.

Or when the time comes i can get enough **** out of the garage to get the car in.

Click to expand...

Still no inside toilets up north then ?

ukadamwest said:

Still no inside toilets up north then ?

Click to expand...

Think you misinterpreted the meaning of the word ****.

ukadamwest said:

Still no inside toilets up north then ?

Click to expand...

LMFAO :hysterically_laughi:hysterically_laughi:hysterically_laughi :clap2::clap2:

Saint.V8 said:

LMFAO :hysterically_laughi:hysterically_laughi:hysterically_laughi :clap2::clap2:

Click to expand...

Don't you start.

Saint.V8 said:

LMFAO :hysterically_laughi:hysterically_laughi:hysterically_laughi :clap2::clap2:

Click to expand...

Cheeky savern cants,

ukadamwest said:

Still no inside toilets up north then ?

Click to expand...

I think you have answered your own question "what is the biggest fanny you have come across"

Is there a guide for replacing the sunroof liner...without removing all the headlining?

Is there a guide for replacing the sunroof liner...without removing all the headlining?

Click to expand...

You don't need to remove the headlining to get to the sunroof panel, the roof itself and the headlining panel slides into a box, or tray, if you like, mounted in the roof, so removing the headlining gets you no more access to the panel.

P38



Classic



From Parts Catalogue here : http://www.allbrit.de/UNI.cfm?PAGE=830664&SPRACHE=EN

Ive got a sunroof cartridge to put in when do the headlining, should be fun. :lol:

Range rover classic heater box :flame2::flame2::violent:

domino said:

Is there a guide for replacing the sunroof liner...without removing all the headlining?

Click to expand...

I don't think it's really feasible, but there's a good photo guide to the job here:- Range Rover 4.6 HSE - Detailing World

That said if anyone knows different I'll be delighted to be proved wrong.

I'm probably going to have to do mine again before the summer . . .

A

For me it was LH blend motor retaining screws, access to motor easy airbag out, glovebox out, and lower panel off, I undid the screws using a pozi bit, longnose pliers, and a 7mm spanner, replacing em was harder, but Ive had an idea why not replace the screws with hex headed ones, then only spanner needed, some of you will probably disagree and say "piece of ****" just my thoughts.

aj1954 said:

For me it was LH blend motor retaining screws, access to motor easy airbag out, glovebox out, and lower panel off, I undid the screws using a pozi bit, longnose pliers, and a 7mm spanner, replacing em was harder, but Ive had an idea why not replace the screws with hex headed ones, then only spanner needed, some of you will probably disagree and say "piece of ****" just my thoughts.

Click to expand...

aj1954 said:

For me it was LH blend motor retaining screws, access to motor easy airbag out, glovebox out, and lower panel off, I undid the screws using a pozi bit, longnose pliers, and a 7mm spanner, replacing em was harder, but Ive had an idea why not replace the screws with hex headed ones, then only spanner needed, some of you will probably disagree and say "piece of ****" just my thoughts.

Click to expand...

Proper tools piece of ****. Wiping your arse with grease proof paper is also difficult.

wammers said:

Proper tools piece of ****. Wiping your arse with grease proof paper is also difficult.

Click to expand...

Was it called izal?

pete1987RRC said:

Was it called izal?

Click to expand...

Izal was banned due to health and safety- anus paper cut