Yesterday I brought home a gas bottle that had been in the stream .

OldIrishWulf · Mar 16, 2012

I saw it a few days ago but didn't want to haul it back home ,but after I saw a wood burning rocket stove, for sale at 60 a pop ,I had to do some research . I will be designing a wood gasifier stove of some sort .
I stayed up all night looking for the best way to use it as a cooking stove .I now have some ideas on how to go about making the thing .First I need to find and liberate some heavy steel pipe from one of the many abandoned industrial building sites .A Sunday job

.

Any way ,I thought I'd share this old technology I just learned of Trash Powered Honda - DIY - www.gekgasifier.com - YouTube .That is a nice flippin setup .

owl · Mar 16, 2012

you may find these links interesting.

Stanley Meyers who had the water powered car was working with a RN Admiral on water powered war ships and they were due to give a presentation in the house of lords but in the previous week they both died, I wonder why!!!

Also the magnet motor is very interesting could do with one to power my house.

http://thecrowhouse.com/Documents/free energy..pdf

magnetic generator

water powered car - YouTube

fanatic · Mar 16, 2012

before you blow yourself up

to safely cut gas bottles you want them gas free and fill with water to purge any remaining.

Also depending on the valve type they may appear empty, but contain some residual gas, you want to use welding gauntlets and keep face away and valve aimed away from anything.

the second reason for wearing gloves is so if it does have gas it won't freeze your hand to it as the gas escapes and the pressure drops.

Even if you think they are empty- it is wise to treat them as not until purged with water.

fanatic · Mar 16, 2012

Oh and the GEK produces tar, look at victory gas works for ideas

stchris356 · Mar 16, 2012

:5biagree:

jamesmartin · Mar 16, 2012

owl said:
you may find these links interesting.

Stanley Meyers who had the water powered car was working with a RN Admiral on water powered war ships and they were due to give a presentation in the house of lords but in the previous week they both died, I wonder why!!!

Also the magnet motor is very interesting could do with one to power my house.

http://thecrowhouse.com/Documents/free energy..pdf

magnetic generator

water powered car - YouTube

all perpetual motion machines ? all give out more energy thats put in ,impossible http://www.google.co.uk/url?sa=t&rct=j&q=stanleyt%20meyer&source=web&cd=4&sqi=2&ved=0CFUQFjAD&url=http%3A%2F%2Fwww.aardvark.co.nz%2Fstanley_meyer.shtml&ei=fpBjT-PpD8aR0QWLr7W4CA&usg=AFQjCNGcpAxSLQrahel6V85iaPfxuo7e6Q&cad=rja and this
http://www.google.co.uk/url?sa=t&rc...sg=AFQjCNEntUY8bSBt_M7WAmPBlTQQR-ISsg&cad=rja

Pikey · Mar 16, 2012

My old BBQ & camping stove. Didn't sorch the grass so never got hassle of site owners.

In heater Mode.. Filled with wood and charcoal and the lid on the heat was phenomenal,

In Use

Bit of steak stuck to the side of it..

Can ya see the Devil???

jamesmartin · Mar 16, 2012

nice lawn

Pikey · Mar 16, 2012

jamesmartin said:
nice lawn

Thas the paved patio actually..

and it weren't my house I was just lodging there, before I bought me pikey wagon.. In fact yu could say that's what made me buy a pikey wagon..

livers · Mar 17, 2012

Or you could use super efficient LEDs
LED converts heat into light +200%.efficiency, page 1
Just imagine one end of a gas bottle cooking a game pie and the other end making ice cream, and both charging your leisure battery, whilst crossing death valley with the aircon on full blast in a prius (as long as the lights are on)

fett · Mar 17, 2012

when in heater mode where did the smoke go?

fanatic · Mar 17, 2012

Look at ozpig for idea's

OldIrishWulf · Mar 19, 2012

Thanx for the links .I dont intend modifying a wood fueled motor .I really just want a good wood fueled stove . I found a few great web sites all I need is wide diameter pipe to use for the middle bit .

That shows a fan on bottom , mine wont have one .
Thats a drawing lifted from tinterweb but it gives a good idea of what i want to make .
After I drain any remaining gas ,removing the valve and purging with water,I intend cutting the handles off the bottle and moving them down to the side .Depending on the size of pipe I find/acquire/buy ,I will cut a tight hole to suit and mark a circle near the top yada yada yada .

I'll get back to this ,when I actually start cutting .
This guy explains how the thing might work ,much better than I ever could .Spectra Wood Gas Stove - YouTube .

fanatic · Mar 19, 2012

OldIrishWulf said:
Thanx for the links .I dont intend modifying a wood fueled motor .I really just want a good wood fueled stove . I found a few great web sites all I need is wide diameter pipe to use for the middle bit .

That shows a fan on bottom , mine wont have one .
Thats a drawing lifted from tinterweb but it gives a good idea of what i want to make .
After I drain any remaining gas ,removing the valve and purging with water,I intend cutting the handles off the bottle and moving them down to the side .Depending on the size of pipe I find/acquire/buy ,I will cut a tight hole to suit and mark a circle near the top yada yada yada .

I'll get back to this ,when I actually start cutting .
This guy explains how the thing might work ,much better than I ever could .Spectra Wood Gas Stove - YouTube .

built similar with various results, I have a wood gasifier I built-grate needs altering

Yesterday I brought home a gas bottle that had been in the stream .

OldIrishWulf

Well-Known Member

owl

Well-Known Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

stchris356

New Member

jamesmartin

Well-Known Member

Pikey

Dummy Ejection Facilitator..

jamesmartin

Well-Known Member

Pikey

Dummy Ejection Facilitator..

livers

Well-Known Member

fett

Well-Known Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

OldIrishWulf

Well-Known Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Similar threads