working pressure

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Well, if anyone does managed to make a mess of removing the cooler I have a spare in my garage doing nothing :p
 
defender300td1 said:
Oi you friggin know all they were leaking !!
Click to expand...

So you took them off the cooler and got away with it, many more will not. Specially older vehicles. It makes sense to me to warn someone before they try to remove the pipes of the realities that may occur. Rather than them come back and say "You said take the pipes off and i knackered my oil cooler" Not all P38s are YOUR particular P38. :):)
 
wammers said:
So you took them off the cooler and got away with it, many more will not. Specially older vehicles. It makes sense to me to warn someone before they try to remove the pipes of the realities that may occur. Rather than them come back and say "You said take the pipes off and i knackered my oil cooler" Not all P38s are YOUR particular P38. :):)
Click to expand...

No comment I want to speak to my Solicitor wammers you can't Patronise me you seem to tell people what they need to know depending what mood your in :)
And don't give me the drivvle about feeding someone too much information :):):)

Just remember no matter how long the pry bar its the pressure that is put on it that Dictates the force not the length of the bar ;)
 
Last edited:
defender300td1 said:
No comment I want to speak to my Solicitor wammers you can't Patronise me you seem to tell people what they need to know depending what mood your in :)
And don't give me the drivvle about feeding someone too much information :):):)

Just remember no matter how long the pry bar its the pressure that is put on it that Dictates the force not the length of the bar ;)
Click to expand...

I do sometimes make the mistake of thinking the person i am talking to knows their arse from their elbow this is true. With the pry bar the point is, the shorter it is the less leverage it has, something that in the past you failed to grasp. So you cannot exceed a norm. Just like you can lift a ton easily with a ten ton jack, but won't move it with an half ton one, same principal. :):)
 
Saint.V8 said:
I am not going to go there.....lest to say....

f1xd1=f2xd2
Click to expand...
Yes saint your Mathematical Equation

This is about a bit if play in a bush that was actuly fecked!!

If you have a 1 foot bar or a 3 foot bar as long as your in control of the said bar you can leaver the radius arm to check for play that you couldn't exert with your bare hands yes I know the longer bar can emmit a stronger force as the length is longer and the same identical force can come from the longer bar , but that you prefantic lot all over just becuase I have a 10 foot bar doesn't mean I have to use extrem force does it but as wammers thinks all people are stupid then I guess I can only use a one foot bar so that I don't over flex any thing got to laugh at you boarding school boys :)
 
defender300td1 said:
........got to laugh at you boarding school boys :)
Click to expand...
Ha Ha, when i was a kid my parents didnt have a pot to **** in or a window to throw it out of!! I went to a rough state school and was taught by my parents to work hard.

In order to go to university, my parents had to remortgage to pay for it.

Yes i talk like Hugh Grant and sound like i had a silver spoon in my mouth as a kid, but trust me I worked hard for everything i have and i am eternally grateful to my parents who sacrificed everything they had to ensure i was educated and had a good childhood. In that respect i am privileged but it certainly isnt from anything other than hard work and sacrifice!
 
defender300td1 said:
Yes saint your Mathematical Equation

This is about a bit if play in a bush that was actuly fecked!!

If you have a 1 foot bar or a 3 foot bar as long as your in control of the said bar you can leaver the radius arm to check for play that you couldn't exert with your bare hands yes I know the longer bar can emmit a stronger force as the length is longer and the same identical force can come from the longer bar , but that you prefantic lot all over just becuase I have a 10 foot bar doesn't mean I have to use extrem force does it but as wammers thinks all people are stupid then I guess I can only use a one foot bar so that I don't over flex any thing got to laugh at you boarding school boys :)
Click to expand...

The post was about the MOT test. Quote from testers manual:- "A small pinch bar should be used to check for wear or play in many of the suspension components covered in this section". Point was that if a large bar is used almost anything can be made to move. That is why a SMALL pinch bar is specified so that musclebound arseholes can't apply to much pressure do damage or fail something that is otherwise sound. Are you having trouble understanding this principal?
 
defender300td1 said:
......... got to laugh at you boarding school boys :)
Click to expand...
I went to a sink school in the East End of London, no university, worked hard studied hard in my own time whilst working and ended up designing and manufacturing computer hardware.
It's sad that you youngsters have been so let down by state education these days that you can barely manage to write in comprehensible English
 
Datatek said:
I went to a sink school in the East End of London, no university, worked hard studied hard in my own time whilst working and ended up designing and manufacturing computer hardware.
It's sad that you youngsters have been so let down by state education these days that you can barely manage to write in comprehensible English
Click to expand...

Just Like a chav I well as I've said time and time again experience rules education ;);)
 
wammers said:
The post was about the MOT test. Quote from testers manual:- "A small pinch bar should be used to check for wear or play in many of the suspension components covered in this section". Point was that if a large bar is used almost anything can be made to move. That is why a SMALL pinch bar is specified so that musclebound arseholes can't apply to much pressure do damage or fail something that is otherwise sound. Are you having trouble understanding this principal?
Click to expand...

Then tell me you prat how you could actualy damage a bush when squeezed in between its mounting bracket it can hardley be flexed as usual your just a picky fault finding man that has nothing better to do :):):(
 
B23E430F-1EED-45C9-A360-DB46903F96FA-575-000001D964F27077.jpg
twist that and damage the bush yea right

B23E430F-1EED-45C9-A360-DB46903F96FA-575-000001D964F27077.jpg
 
defender300td1 said:
B23E430F-1EED-45C9-A360-DB46903F96FA-575-000001D964F27077.jpg
twist that and damage the bush yea right

B23E430F-1EED-45C9-A360-DB46903F96FA-575-000001D964F27077.jpg
Click to expand...

Do you know sometimes you amuse me. Do you seriously think the MOT testing manual is for use only on P38s. Do you seriously think that the radius arms of a P38 are the only thing tested with a pinch bar. The recommendation is there for a reason. Please stop and think why they don't make 6 mm spanners a foot long.
 
You must log in or register to reply here.

Similar threads

roule
Rover V8 3,9 oil pump pressure
Replies
3
Views
339
roule
roule
J
4.0 Thor - Oil Pressure check
Replies
2
Views
921
JohnKeane
J
TITCH SANDERS
How to fit Autobox oil cooler pipes Range Rover P38 Diesel BMW 1998
Replies
7
Views
1K
chad2008
chad2008
MJI
Disco 2 Auto box cooler hoses question.
Replies
5
Views
919
Loafer61
Loafer61
S
L322 Thermostat Overflow Hose PCH001130
Replies
1
Views
498
Mark Piercy
Mark Piercy
Back
Top