Wobberly 110

Greetings... after seeking some advice on here a few weeks back regarding a good old wheel wobble at 50mph i have now changed my radius arm bushes but this has had no effect at all on curing the problem. I have also changed the drop arm ball joint as it had a little play in it, as well as checking for wheel bearing / pin play (there was none). I had the wheels balenced and nothing seems to stop it??? Any one with more ideas would be most helpful as it's getting annoying now. ( i have a spare steering box and as mine is leaking so i will swop it out this weekend and see if that helps)

After having read all other posts and assuming you have either checked or replaced all the components mentioned brings me to the conclusion that yer wheels may be buckled

Assuming of course its possible to balance buckled wheels, which it may be but the wheel obviously isn't going to track right, hence the visible wobble?

"A" frame ball joint?

Track rod bent / knackered end?

All track rod ends replaced but i did hit a rather large hole at speed on the last off road day so i think i will swap the ns wheel to the spare to chexck if it is buckeled. I will let you know ( a frame ball joint is in good condition also) Cheers

monkeydiver said:

i think i will swap the ns wheel to the spare to chexck if it is buckeled.....

Click to expand...

thought you said you'd had them balanced ?

might want to check your drive shafts and the associated UJs

steering damper fooked

Steering damper methinks also.

Check the swivel pins for play also.

I got round my wobble in the steering/wheels by replacing the axle