Wish me luck starting after rebuild tonight

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sandyt said:
Afternoon well got into o rings this afternoon once I had a proper look in daylight and that was an odd experience as I did most of this at night with lights - there was a drip a steady drip from the oring so dismantled and put new orings on and there was a drip now I am wondering if I should put both sets of orings on the old ones were in really good shape which made me wonder if the clamp had never been tightened up any ideas please oh and the bottom seal on the rad is suspect so will put another new one on and lastly ran her all day whilst I was doing bits and pieces and temp stayed absolutely dead centre and she is running very nicely indeed
Click to expand...
Doubling up the O rings won't fix it. You need to ensure the surfaces the O rings mate to are clean and that you get the screw good and tight, a socket head is the best. You sure it's not the matrix leaking?
 
I will have another go tomorrow think I may just pull the whole unit out and see I suspect that it is the mating surfaces as you say and that I need to replace the screw pref with a hex head then I can get it tight - don't suppose you would know what it s the screw that is
Anyway at least I am moving forwards and not under the car in the cold:)
 
:behindsofa:

No PM yet.
All I need are your name & address details....NOT HERE !!...in a PM and I will post them 1st class monday morning,
You will need a 4mm allen key for them, preferably one with a ball end. which makes it easier to install or remove.
:)
 
Just a thought, had to do my O rings couple weeks ago and remember that the pipes had a notch in them and had to locate just right in the matrix. Might be worth checking.
 
kds said:
Just a thought, had to do my O rings couple weeks ago and remember that the pipes had a notch in them and had to locate just right in the matrix. Might be worth checking.
Click to expand...

Yes checked that I did the orings about 5 yrs ago and at that time to be honest the screw head was not the best have some more bits coming so next weekend will sort out - still on plan to have her on the road by 2013 things still to do door locks ,RF unit ,drivers door replace, headlights replace ,repaint leading edge of roof rack, new radiator, new battery , sunroof lining sag to fix , new bonnet insulation (have removed the mice )and last new tyres two weeks and counting:eek::eek:
 
Sandyt,

I have a spare headlining kit (light grey) if you are interested.

I bought it to do mine over the Xmas break but I part ex'd the car.

I got it from ABS Trim. Comes with the adhesive too. I have not even opened the bag.

I also have two front new clear indicator lens and side repeaters, with bulbs.

Interested?
 
You must log in or register to reply here.

Similar threads

awkwardbob
L322 Gearbox / Torque Conv Replace / Rebuild or not
Replies
15
Views
2K
marjon
marjon
wowa75
200tdi rebuild, trouble starting
2
Replies
32
Views
5K
wowa75
wowa75
N
TD5 Cranking Not starting - Solved
Replies
18
Views
4K
NdG1977
N
Louis2.5DSE
P38A P38 DSE fires but won't start
2 3
Replies
58
Views
9K
BDC
BDC
M
Trouble starting freelander 1 td4
2
Replies
23
Views
4K
Nodge68
Nodge68
Back
Top