Wiring question

Lost out on a stainless steel A nudge bar on ebay but I may have the chance at a soft LR nudge bar with the spot lamps at the side for my '04 TD4. Is it safe for me to assume that the existing wiring loom will have the connections in place for the spotlights? I have the factory fog lights so I can't use that wiring, there are a couple of spare switches that I haven't yet pulled to see if they are connected.

My other option is to resell the spotlights and just fit an LED light bar but will that get in the way of any air cooling?

Pull the switch blanks oft. Yer may find the loom connected to the blank if yer lucky.

Mick X11 said:

Is it safe for me to assume that the existing wiring loom will have the connections in place for the spotlights? I have the factory fog lights so I can't use that wiring, there are a couple of spare switches that I haven't yet pulled to see if they are connecte

Click to expand...

The wiring won't be there for the spots.There's nothing to stop you installing the wiring and relay though. My LED bar is wired in to the main beam circuit, using a relay to power the LED bar.

Mick X11 said:

My other option is to resell the spotlights and just fit an LED light bar but will that get in the way of any air cooling?

Click to expand...

That's an option. The LED bar I have makes no difference to the cooling system, which is well over sized for the TD4 anyway.