hi
just wished to pass it on ,
whilst replacing my interior, dashboard etc
found on the autos where the clutch pedal is omitted there is an ideal place to pass wires through the bulkhead, alot easier opposed to trying to get wires by the engines ecu box
on the inside there is a small piece of soundproofing that lifts up, accessing a nice inch square hole , ideal for the synergy dashboard switch
personally pushed some trunking through so easier in future to push wires through, but sealed each end to prevent cold and engine fumes from entering the cabin
just wished to share
gary
just wished to pass it on ,
whilst replacing my interior, dashboard etc
found on the autos where the clutch pedal is omitted there is an ideal place to pass wires through the bulkhead, alot easier opposed to trying to get wires by the engines ecu box
on the inside there is a small piece of soundproofing that lifts up, accessing a nice inch square hole , ideal for the synergy dashboard switch
personally pushed some trunking through so easier in future to push wires through, but sealed each end to prevent cold and engine fumes from entering the cabin
just wished to share
gary
Last edited:
