wiper drive cable

help,

dont know how to split wiper cable from motor,
any help welcome

Unscrew the 19mm bolt that is on the end of the drive cable that attaches to the motor, Undo the 2 screws holding the motor on to the bulkhead, turn the motor around and there will be 4 small bolts (6mm I think) that hold the cover on to the motor, once off there is a circlip that holds the drive assembly on to the wheel, take it off , lift out drive and wiper cable can be detached.

thanks for that mate,
i got it off before i read your post.
ive checked the corbon contacts on the motor and one of the has worn down badly and twisted 90 degrees
any body know where i could get a kit ?