Wiper Delay Relay?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

jonah

Active Member
Posts
171
Location
Hurdersfield!
Hi All,

My Wiper delay doesn't work on my 110 1992 200TDI and have been told it's the relay?
If it is where do I find the relay and what relay parts code is it?

Many thanks as always

Jonah (still loving my CSW)
 
what fooking park switch and what intermittent wipe??

On older deependers like yours there is no intermittant position. Instead you flick the switch down to do a wipe. On newer ones 300tdi onwards (dunno about 200tdi's) pushing the switch down gives intermittant wipe. If the park switch on the motor fails it can lose the intermittant function.
 
On older deependers like yours there is no intermittant position. Instead you flick the switch down to do a wipe. On newer ones 300tdi onwards (dunno about 200tdi's) pushing the switch down gives intermittant wipe. If the park switch on the motor fails it can lose the intermittant function.

I knew about mine can't be doing with these new fangled fancy bits though. Am a master at parking me wipers in the down position.. :D
 
Land Rover 1986 Dunno about later ones

Wiper stalk,

Flick down (push to make switch sprung) one single wipe and park,

Up position one Constant slow wipe,

Up position two Constant Fast wipe.

Jai
 
i had this problem on my 110 200 tdi auto what i did was at the side of the hand rail passenger side there is the wiper unit motor give that a good soaking with wd40 . it did it for me
 
i had this problem on my 110 200 tdi auto what i did was at the side of the hand rail passenger side there is the wiper unit motor give that a good soaking with wd40 . it did it for me

That plastic bit with all the connections on it is the park switch.:D:D:D
 

Attachments

  • 1938_2.jpg
    1938_2.jpg
    9.1 KB · Views: 89
Last edited:
Back
Top