Wiper Delay Relay?

jonah · Feb 12, 2009

Hi All,

My Wiper delay doesn't work on my 110 1992 200TDI and have been told it's the relay?
If it is where do I find the relay and what relay parts code is it?

Many thanks as always

Jonah (still loving my CSW)

ratty · Feb 12, 2009

What do you mean your delay doesn't work?

It sounds like your park switch is goosed to me.

woods767 · Feb 13, 2009

I expect its the same as mine, the intermitant setting doesent work (down on wiper control), but they park fine. I would be interested to know what the problem is too.

Green Bob · Feb 13, 2009

Intermittent wipers on a Land Rover?

That can't be right.

Can't be a Land Rover then...

ratty · Feb 13, 2009

woods767 said:
I expect its the same as mine, the intermitant setting doesent work (down on wiper control), but they park fine. I would be interested to know what the problem is too.

It's the park switch

Pikey · Feb 13, 2009

what fooking park switch and what intermittent wipe??

ratty · Feb 13, 2009

redhand said:
what fooking park switch and what intermittent wipe??

On older deependers like yours there is no intermittant position. Instead you flick the switch down to do a wipe. On newer ones 300tdi onwards (dunno about 200tdi's) pushing the switch down gives intermittant wipe. If the park switch on the motor fails it can lose the intermittant function.

TheVengefulElephant · Feb 13, 2009

on my "older deepender" I have two upwards positions, both producing the same effect

Pikey · Feb 13, 2009

ratty said:
On older deependers like yours there is no intermittant position. Instead you flick the switch down to do a wipe. On newer ones 300tdi onwards (dunno about 200tdi's) pushing the switch down gives intermittant wipe. If the park switch on the motor fails it can lose the intermittant function.

I knew about mine can't be doing with these new fangled fancy bits though. Am a master at parking me wipers in the down position..

jai_landrover · Feb 14, 2009

Land Rover 1986 Dunno about later ones

Wiper stalk,

Flick down (push to make switch sprung) one single wipe and park,

Up position one Constant slow wipe,

Up position two Constant Fast wipe.

Jai

Pikey · Feb 14, 2009

Landrover 1987,

Push down and hold no park stops anywhere on the screen

1st up slow wipe stops anywhere
2nd fast wipe stops anywhere.

richardjeaton · Feb 14, 2009

redhand said:
Landrover 1987,

Push down and hold no park stops anywhere on the screen

1st up slow wipe stops anywhere
2nd fast wipe stops anywhere.

Just the same as mine then!

gblow · Feb 14, 2009

i had this problem on my 110 200 tdi auto what i did was at the side of the hand rail passenger side there is the wiper unit motor give that a good soaking with wd40 . it did it for me

ratty · Feb 14, 2009

blowjob said:
i had this problem on my 110 200 tdi auto what i did was at the side of the hand rail passenger side there is the wiper unit motor give that a good soaking with wd40 . it did it for me

That plastic bit with all the connections on it is the park switch.

Wiper Delay Relay?

jonah

Active Member

ratty

I'm not special I'm limited edition

woods767

Well-Known Member

Green Bob

Active Member

ratty

I'm not special I'm limited edition

Pikey

Dummy Ejection Facilitator..

ratty

I'm not special I'm limited edition

TheVengefulElephant

Well-Known Member

Pikey

Dummy Ejection Facilitator..

jai_landrover

Well-Known Member

Pikey

Dummy Ejection Facilitator..

richardjeaton

New Member

gblow

New Member

ratty

I'm not special I'm limited edition

Attachments

Similar threads