ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
My windows work fine, but everytime when pressing up I get the message that the window is not set. It does this for all 4.
Any ideas?
Any ideas?
windows not set message
- Thread starter ⓡⓤⓓⓨ
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
enery8
Active Member
- Posts
- 540
- Location
- Near Weymouth, Dorset
Have you had the battery disconnected? If you check the owners handbook it will tell you to open and close each window in a continuous movement. Worked for me!
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
I haven't diconnected the battery yet, but maybe previous owner did.
Unfortunately there's no owner's manual with the car.
Any chance of describing the procedure?
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
window down hold 5 secs and up all in one movement..
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
enery8
Active Member
- Posts
- 540
- Location
- Near Weymouth, Dorset
If you download Rave you will find a copy of the owners handbook included
ovalandrover
Well-Known Member
- Posts
- 1,636
if you havnt got owners manual hope you have the key code for when the door dosen't open with the fob.
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
Thanks. Found a d/l site
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
Yep, got that today from LR dealer
discomalc
New Member
- Posts
- 304
- Location
- Hastings east Sussex
same proceedure for sunroof or any "not set " errors
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
happy days now then, bet you wish it was all as easy as that hahaha..
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
when you get it just take your time its not a hard job, just make sure you put it in even..
Datatek
Well-Known Member
- Posts
- 45,866
- Location
- Near Poitiers SW France
ⓡⓤⓓⓨ;1498462 said:Not quite happy days yet. I still have to fit a new core plug in the block
Given the reliability of LR V8 blocks, you might be better to fit a new block to your core plug:hysterically_laughi
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
LOL
If I'm going to fit a new V8 it'll be a Lexus Ls400 V8. They don't come more reliable than that
rasheed
Well-Known Member
- Posts
- 1,815
- Location
- Bangladesh
'cept he ain't even got the core plug. Its like I recently bought George Washington's axe, the same one he used to cut down the apple tree behind his mother's house. Except the blade had rusted through and been replaced and the handle had been eaten by termites so they'd fitted a new one.
Datatek
Well-Known Member
- Posts
- 45,866
- Location
- Near Poitiers SW France
'cept he ain't even got the core plug. Its like I recently bought George Washington's axe, the same one he used to cut down the apple tree behind his mother's house. Except the blade had rusted through and been replaced and the handle had been eaten by termites so they'd fitted a new one.
He'd just bought a packet of ten new ones
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
He'd just bought a packet of ten new ones
I might need them all 10 too...give it some time
Gonna pick them up tomorrow. LR dealer is going to phone when they're in.
Hopefully in the morning so I have time to fit them/it
Also bought a new set of exhaust manifold gaskets to be safe.
Fingers crossed that'll be the engine sorted, but I have my doubts..lol
markplandylover
New Member
- Posts
- 5
- Location
- margate kent
I have tried doing this and the message still says windows not set! any other ideas ?
