P38A window mechanism

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kermit_rr

kermit_rr

Very
Full Member
Posts
33,912
Location
North Shropshire
Hi, decided to look at my slow/sticky drivers window.
The part that moves, with teeth on seems quite loose, does this mean the bearing is knackered and i need a whole new unit? Or is there any repair i can do?
Cheers
 
kermit_rr said:
Noticed the glass can actually 'rotate' slightly, which is causing it to jam
Click to expand...
The guides on all windows only have to be a tiny bit out of parallel/position for this to happen. Sometimes taking the window right to the bottom before trying to get it to go back up to the top might help temporarily. Have to do this with drivers door of wifey's Pluriel.
Second what's been said above about ensuring accurate positioning of guides and lubrication of moving parts.
 
I think that's the problem I had and Brian found that rubber piece and put it back for me, I think it's a channel to stop the window going like that its like a guide for the window
 
This rail
SAM_1896.JPG
SAM_1897.JPG



SAM_1897.JPG
 
You must log in or register to reply here.

Similar threads

R
Window winder mechanism fit all doors?
Replies
1
Views
538
Hicap phill
H
BarcombeBoy
Freelander 1: interior lights flicker whilst driving. Rear door issue.
Replies
6
Views
810
J_D
J_D
J
F1 driver's door window regulator - part no/ electrical connector?
Replies
3
Views
685
andyfreelandy
andyfreelandy
currymunster
Aux pulley mount replacement.
Replies
8
Views
1K
currymunster
currymunster
L
Disco 3 (LR3) I return to the fold with a Window Fault
Replies
6
Views
620
johnlad
johnlad
Back
Top