Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
On that note, what's the XD9000i like Ben? Been used in anger much? How good is the water proofing?
Winch choice help
- Thread starter Orch
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
On that note, what's the XD9000i like Ben? Been used in anger much? How good is the water proofing?
Bennehboy
Well-Known Member
- Posts
- 2,208
- Location
- Huddersfield
Warn Winch Land Rover Recovery Off Roader Trailer Project Spare Or Repair | eBay
Blow by blow rebuild steps from mid way down this page -> http://www.landyzone.co.uk/lz/f8/bennehboys-d2-adventure-254514-7.html
Blow by blow rebuild steps from mid way down this page -> http://www.landyzone.co.uk/lz/f8/bennehboys-d2-adventure-254514-7.html
Last edited:
Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
Warn Winch Land Rover Recovery Off Roader Trailer Project Spare Or Repair | eBay
Blow by blow rebuild steps from mid way down this page -> http://www.landyzone.co.uk/lz/f8/bennehboys-d2-adventure-254514-7.html
Already read it earlier mate
Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
Oh missed that link though, nice one!
Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
After a lot of reading and researching I think I've decided to go with the Goodwinch TDS 9.5.
I've had a few opportunities to pick up Warn XD9000/i's that need some TLC, but in each case when I've totalled up the cost of new cable, a new wander lead, and in one case possibly a new motor, it's worked out about the same cost as a brand new TDS. Plus the TDS comes with Warranty and local support. Plus I don't know if I've got the skills and tools to do the job anyway.
My final decision is to whether to go for the intergrated solenoid version TDS or the normal? I keep getting drawn to the integrated version. More protection for the solenoids and less messing about relocating solenoids etc. What do others think?
I've had a few opportunities to pick up Warn XD9000/i's that need some TLC, but in each case when I've totalled up the cost of new cable, a new wander lead, and in one case possibly a new motor, it's worked out about the same cost as a brand new TDS. Plus the TDS comes with Warranty and local support. Plus I don't know if I've got the skills and tools to do the job anyway.
My final decision is to whether to go for the intergrated solenoid version TDS or the normal? I keep getting drawn to the integrated version. More protection for the solenoids and less messing about relocating solenoids etc. What do others think?
Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
Well just to add a conclusion to this thread, I eventually ordered a Goodwinch TDS 9.5c with Dyneema rope. Way above my original budget, but hopefully avoiding the buy cheap buy twice situation. Look forward to testing it out!
Similar threads
