will this harm the blend motors?

after having a few hours to mess with my heating (it was nice and warm but only out the ends of the dash)
i stripped what i could and managed to get the top drivers side blend servo one off and the passenger side one off,what a bitch to do,never got anywhere near to undoing the screws on the drivers side bottom one.
the two i removed seemed to be broke,tested them off and no movement,took them apart,still the same.

so in my wisdom i managed to set the blower between the windscreen and footwells manually.i know i wont be able to adjust it on the buttons while driving but for now i will put up with it.
while i decide weather to fork out for new blend motors or spend it on other issues with the car will it harm anything?

cheers
dave

should be ok mate ,i did the same i only had cold air blowing so just unbolted them and manually turned the heater leavers to blow hot and, just left the motors unbolted for a few months.i striped the motors cleaned the brushes and rebuilt them and they seem to all work now,fingers crossed,try that before buying new ones .good luck

thanks for that
seems to heat the interior evenly now,will leave it like it is for now,just got car so other issues more important to sort first.

cant wait to sort it out,not!
cheers
dave