will alloys fit?hi,

hi, thinking of buying some alloys,they are off a 2007 sport 20inch. does anybody know if these will go on my 2001 p38. any info will be gratefull.

I'm sure this question must have been asked a dozen times before - try searching the site.

As SaS above this has been muted once or twice before - a search will locate...

The offsets are different so you'll need spigot(?) rings to create the correct mounting offsets...

seen this scenario on the side of a motorway before.
different off set and large ridiculous alloys and collapsed EAS = back of the AA van minus 2 two shredded tyres

offset is the same.
just the center hole is a different size will require spigot rings and wheel nuts from the later range rover.

phil the carpet said:

hi, thinking of buying some alloys,they are off a 2007 sport 20inch. does anybody know if these will go on my 2001 p38. any info will be gratefull.

Click to expand...

Fit those drug dealer wheels and your next post will be a complaint about your P38 tramlining. They may also be illegal under the new EU wide MOT rules as they are not homologated for the P38.

Datatek said:

Fit those drug dealer wheels and your next post will be a complaint about your P38 tramlining. They may also be illegal under the new EU wide MOT rules as they are not homologated for the P38.

Click to expand...

Does above apply to l322 wheels as well?!

aerofabrique said:

Does above apply to l322 wheels as well?!

Click to expand...

Yes. Only 16" & 18" wheels are homologated on the P38

Oh ok so its size rather than fit. Ill continue with my 18s then for now until spigot rings become mot fail as well

aerofabrique said:

Oh ok so its size rather than fit. Ill continue with my 18s then for now until spigot rings become mot fail as well

Click to expand...

It's size, weight rating, width and suitability for the car. It may come down to only particular wheel types being allowed eventually. For example 18" Hurricanes are LR homologated for the P38 as are the standard 16" but I'm not aware of any other wheels homologated for the P38.

There's gonna be a lot of politicians with car parts chucked thru their windows!!!!

Diesel Do said:

There's gonna be a lot of politicians with car parts chucked thru their windows!!!!

Click to expand...

Better to run the feckers over:flame2:

Datatek said:

Better to run the feckers over:flame2:

Click to expand...

With p38 approved 16" wheels and 35" tyres

aerofabrique said:

With p38 approved 16" wheels and 35" tyres

Click to expand...

Scandanavian ice tyres:clap2:

Datatek said:

Scandanavian ice tyres:clap2:

Click to expand...

Studs and chains!

aerofabrique said:

Studs and chains!

Click to expand...

The ice tyres have nice long studs but I'm all for adding chains:lol:

cheers all, sticking with my original wheels at the end of the day think will leave my rangey as original as poss.

phil the carpet said:

cheers all, sticking with my original wheels at the end of the day think will leave my rangey as original as poss.

Click to expand...

You'll reap the rewards when you come to sell and also when you get a puncture and your wallet feels slightly heavier :>