Why on Earth is this there?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

M6SJG

New Member
Posts
285
Location
Nottinghamshire UK
Anyone any idea why this stainless steel wire is present on the back axle (see photo) - it seems to have no useful purpose but must be there for some reason?

Before anyone comments on the rust... the photo was taken at Rustmasters yesterday whilst the car was drying, after high power cleaning and before rustproofing - and Nick said its in better condition than most 10 year old Disco 2's that he gets in....

Any views welcome
 

Attachments

  • IMG00243-20101221-1313.jpg
    IMG00243-20101221-1313.jpg
    146.1 KB · Views: 315
Thanks. Not come across that before, but its a better hypothesis than mine - I thought it may be making sure the bolt on the right didnt get lost in case it came out for some reason...!
 
M6SJG said:
Thanks. Not come across that before, but its a better hypothesis than mine - I thought it may be making sure the bolt on the right didnt get lost in case it came out for some reason...!
Click to expand...


Close but i think its to stop the bolt on the harmonic damper (the one on the left) coming out and the damper falling off, if the nut comes off. Thats what the wire does on the p38 so i cant see it being any diffrent on a disco.
Mark
 
Well, I got in before the £50 discount ran out (end of this month) and before the 20% VAt, but it was £493 inc Vat. I can say that they did an excellent job - very comprehensive, two operators and each checking the others work at each stage. Impressive
 
It does seem expensive and I had a lot of soul searching before having mine done. However, I thought this was a good deal as Rustmaster had a £50 discount at Knutsford to launch their new facility there. In the new year the same job will be £475 + 20% VAT = £570.

I will say that I consider it to be the best £493 I've ever spent on a Car.

I was shocked by the surface rust after they'd done the pressure spraying and I watched them work and they took their time to ensure they did a really thorough job (9.30am till 5pm). There was gallons of waxoyl going into and onto the chassis and I really do have peace of mind that the job will last - 4 year `guarantee' though they will do a free inspection of the car every year.

I really couldnt have got a better job done. I certainly couldnt have got anywhere near the same job done on a DIY
 
Last edited:
M6SJG said:
Before anyone comments on the rust... the photo was taken at Rustmasters yesterday whilst the car was drying, after high power cleaning and before rustproofing - and Nick said its in better condition than most 10 year old Disco 2's that he gets in....
Click to expand...

Sorry for hijacking the thread, but how did you get on at Rustmaster?? I'm planning on going there very soon to have my 13 year old (but relatively rust-free) Disco 1 done!

Presumably it *is* a really good job rather than just *looking* like a really good job?? I've heard good things about Rustmaster, but the more opinions, the better! :)
 
I can recommend them. There was several coats of waxoyl applied in a methodological fashion with two guys who then checked and went over each others work. I watched the whole thing and was very impressed.
 
M6SJG said:
I can recommend them. There was several coats of waxoyl applied in a methodological fashion with two guys who then checked and went over each others work. I watched the whole thing and was very impressed.
Click to expand...

fantastic... and I assume the preparation work (clearly the most important step!) was done thoroughly enough to make the waxoyl last forever instead of just falling off with the rust that it was painted on to??
 
We'll I hope so! It was a very high pressure wash. Perhaps this is standard practice but you can see from the photo that they got down to metal in areas of surface rust. The guys also spent some time inspecting during the drying stage and going over the underside with a wire brush or screwdriver if they had any doubt. They also didnt mind me looking underneath while they were working to see how they were doing. I felt included in the process and it all looked good to me.

I've no basis for comparison and perhaps all rustproofers have the same technique. The only other thing worth noting is that in these conditions (sub zero) the guys had to regularly heat up the waxoil sprayers to ensure smooth application. I'd say they coped well but I'd also guess it would be quicker to have done during the summer.
 
i'm not too fussed about how long it takes, to be honest, as long as it's all done in a day! It'd be a shame to have to come back again the day after - it's a long way away for me!
 
Just make sure you get a 9.30/10 am slot then you'll be the first car of the day (they only do 2). I drove to Knutsford from Nottingham so definately wanted it done in one day too!
 
You must log in or register to reply here.

Similar threads

Knappster
Shot-blasting steel wheels
Replies
9
Views
1K
Knappster
Knappster
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
SootScout
I recorded over 200 trips on my 2017 Discovery Sport to find out if its DPF is fit for purpose
2 3
Replies
44
Views
2K
Plasser
P
C
is there an 8 on this cylinder head!?
Replies
1
Views
292
kermit_rr
kermit_rr
dag019
Why is there always one!
Replies
8
Views
1K
tottot
tottot
Back
Top