Why is my 02reg Disco TD5 leaning???

Hello all,

Recently I have noticed that my TD5 Disco seems to be leaning on the drivers side almost as if there was an abundance of weight all down that one side.

I replaced my discs and pads last weekend and took a good look at the springs but they seem fine so I'm calling upon your infinite wisdom as to why this might be happening and what course of action to take next.

Thanks in advance

The drivers side gets the most wear. You say you checked the springs so you have springs all round?. Usually the drivers side springs are slightly higher to compensate for the driver being in the vehicle. Maybe your springs are weakening think about changing them.

Yes there are springs all round.
Just to clarify too, the whole side is leaning not just at the front, but I shall definitely bear that in mind thank you

Level sensors?

would both level sensors on the off side go at the same time?

BrummieYamYamRover said:

would both level sensors on the off side go at the same time?

Click to expand...

one per side but one spring on a side beaing weak or misadjusted would cause a lean