iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Which propshaft UJ?
- Thread starter Trewey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Reet, ah found this...
Propshaft U/J TVC100010
Stuck the cups back on the uj and it measures 74mm across. See if that helps
Propshaft U/J TVC100010
Stuck the cups back on the uj and it measures 74mm across. See if that helps
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
So, according to Island 4x4, RTC3291, RTC3458 and TVC100010 are all the same.
Here's a pic of one of my old UJs (2 cups missing) and a new RTC3458.
The cups are 27mm diameter on both, but the old one is 82mm from the end of one cup to the other, whereas the new one is 75mm.
Don't suppose anyone's got an RTC3346 kicking around that they can measure for me? That's the one specified for chassis numbers up to CA....... (up to 1986).
I can only guess that my prop has been replaced by an earlier version at some point.
Here's a pic of one of my old UJs (2 cups missing) and a new RTC3458.
The cups are 27mm diameter on both, but the old one is 82mm from the end of one cup to the other, whereas the new one is 75mm.
Don't suppose anyone's got an RTC3346 kicking around that they can measure for me? That's the one specified for chassis numbers up to CA....... (up to 1986).
I can only guess that my prop has been replaced by an earlier version at some point.
shadowster
Well-Known Member
- Posts
- 1,372
- Location
- 55'38.4n.4'49.1w
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
bump
(Buster's about!)
(Buster's about!)
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
are you sure its a deepender prop??
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
it came off me deepender, but that don't mean it originated on it!
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
on the link fur Island that ah gave ye trewy, it says the older ones are 82mm. Ah reckon ye'd be fine with these....
Propshaft UJ (to 86) OEM RTC3346HS
Propshaft UJ (to 86) RTC3346
unless anyone else can measure theirs fur sure
Propshaft UJ (to 86) OEM RTC3346HS
Propshaft UJ (to 86) RTC3346
unless anyone else can measure theirs fur sure
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
It would be good if someone could confirm for definite.
I've already spent 13 quid on 2 wrong UJs (one of which I can't return because it's been fitted).
I've already spent 13 quid on 2 wrong UJs (one of which I can't return because it's been fitted).
- Posts
- 9,208
- Location
- A bit sarf of Dorking
I have four of those there 82mm UJ's sitting doing not a lot in my kitchen in Surrey. Made by GMD. Wouldn't fit my 110. Do I hear an offer?
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
FFS!
Thanks very much for the offer mate, but I've just ordered them off Paddocks! I've got to have the prop back on before Saturday, so I couldn't wait any longer.
I'll check me rear prop tomorrow and if they're the same size I'll have a pair of em off yer - they're bound to need replacing before long.
Thanks very much for the offer mate, but I've just ordered them off Paddocks! I've got to have the prop back on before Saturday, so I couldn't wait any longer.
I'll check me rear prop tomorrow and if they're the same size I'll have a pair of em off yer - they're bound to need replacing before long.
- Posts
- 9,208
- Location
- A bit sarf of Dorking
Given that I'm not sure whether to go long or short on landy bits - here's the deal. A pint of Guinness for each UJ. £3.20 plus postage.
