sailerman1951
Member
- Posts
- 21
Purchased a set of wheels and tyres for my 1998 p38 but my wheel nuts are too large in diameter for the holes in the new wheels any idead please
P38A Wheel nuts
- Thread starter sailerman1951
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
You have got L322 wheels they need different nuts, look on Ebay about £70.00 a set for good ones plus a few bob for locking nuts. You will also need spigots as the L322 wheels have a larger hub fitting.
- Posts
- 12,229
- Location
- Sud ouest France !
Double thread's!!!!!!
sailerman1951
Member
- Posts
- 21
sailerman1951
Member
- Posts
- 21
Hub seems fine no play but my nuts fit the threads but not the holes in the wheels
- Posts
- 12,229
- Location
- Sud ouest France !
discool
Well-Known Member
- Posts
- 13,513
Incorrect wheel nuts. Simples... the wheel supply should have supplied the correct nuts, and which are suitable for both wheel and hub thread.
brianp38dse
Well-Known Member
- Posts
- 19,659
- Location
- heathrow
Just replied in the other thread and then see Wammers beat me to it never mind
sailerman1951
Member
- Posts
- 21
SorryDouble thread's!!!!!!
- Posts
- 12,229
- Location
- Sud ouest France !
