wheel fitment sizes?

im looking for a new set of allloys for my freelander and i had thought the fitment was 5 x 114.3 offset 35-40
but ive been informed its actually 114 dead.

ive been looking around and cant find anythin else with the same fit.

would 114.3s squeeze on???

Hi stik and welcome what year is the car as I believe the j rating changed around 2000 - 2001 ish...

hmmmm im sure mines is a 98 or 99. its an s reg

welcome to the madhouse, Nikki.

*STIK* said:

im looking for a new set of allloys for my freelander and i had thought the fitment was 5 x 114.3 offset 35-40
but ive been informed its actually 114 dead.

ive been looking around and cant find anythin else with the same fit.

would 114.3s squeeze on???

Click to expand...

0.3mm so if that wur true then each hole would be out by less than 0.15mm which wouldn't really make much difference to wheel fittings

see this is what i thought but ive been told they wouldnt fit, wanted to see if any1 on here had any experience with it

*STIK* said:

hmmmm im sure mines is a 98 or 99. its an s reg

Click to expand...

If thats the case youl be ok its the early wheels that wont fit the later models not the other way round so youl be fine...

im not lookin for land rover wheels tho.i hate my standard land rover wheels
im lookin for a set of aftermarket ones n cant find any 114 fitment only the 114.3 as its almost every jap cars fit.

*STIK* said:

im not lookin for land rover wheels tho.i hate my standard land rover wheels
im lookin for a set of aftermarket ones n cant find any 114 fitment only the 114.3 as its almost every jap cars fit.

Click to expand...

see plenty around with non lr wheels on so you should be able to get em. test fit em before buying em would be the best bet there me thinks. make sure you tighten the wheel nuts though as I bought a set that would fit the studs but once tightened were fouling...