What's your best tool

ratty said:

power probe.

Click to expand...

Ooo, err, missus!:behindsofa:

cans of wd40 and a bloody big hammer, (failing that, a quick look at the insruction book to see how it should be done):behindsofa:

Got to be the big hammer, I'm afraid

Other than that I'd have to say a welder and an angle grinder.

ratty said:

power probe.

Click to expand...

+1

Power probe is my favorite tool, saves so much time when playing with electrics...

Failing that my Makita 10.7V impact, saves so much time undoing nuts and bolts...

Punch & chisel set Oh and a big hammer to clout em with.

That and me 18v DeWalt impact driver

redhand said:

Punch & chisel set Oh and a big hammer to clout em with.

That and me 18v DeWalt impact driver

Click to expand...

Notes good as the makita 18v lion

Vagrent said:

Notes good as the makita 18v lion

Click to expand...

Both are too big though, thats what makes the 10.7V so good, pistol sized, if I need more I use air tools

underseal brush

fookin big knocking stick,When i nod my head you hit it:hysterically_laughi

shifter, big hammer and wd40

Prop shaft tool save so much time with those f in fine thread buggers ,sump drain plug with hose for defenders . And best of all atf fluid transfer pump you try filling up a r380 gear box without spilling it all over yourself oops that's three O and defender wheel bearing box spanner!

Vagrent said:

Aye, my stihl ts400 is fooking great.

Click to expand...

snap

blue beasty said:

Are we talking tools fer Landys?

Just checking........

Click to expand...

Yes

sledge.

goonarmy said:

sledge.

Click to expand...

Surely thats only good when it snows?

Heli-coil kit when that bolt snaps and you have to drill it out accept no substitute.

Gotta go with the majority here and say big f**king hammer always works a treat

If I had a bush compressing tool for the front spring chassis bush, that would be my best tool right now but at £200 I dont have one.

Welder
Jack...........hammer

T'internet.