What's you doing to day on your land rovers?
- Thread starter Mud Lover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,311
- Location
- west wales coast
Welding the fookoutofit!
Big Stew
New Member
- Posts
- 37
- Location
- Horncastle, Lincs
Playing with it cos I haven't broke it yet ! ! !
pasted this in a few places as i really need an answer, sorry!
today i are mostly bin going mad here!
had all wheels off, re did connection to wheel cyl with ptfe tape, tightened all joints/unions, put grease on all nuts where the pipe goes in, clamped all flexi, good solid pedal. took off one at a time and bled that wheel, then removed all and bled again, still getting air!!!!
and i mean at each wheel each time.
today i are mostly bin going mad here!
had all wheels off, re did connection to wheel cyl with ptfe tape, tightened all joints/unions, put grease on all nuts where the pipe goes in, clamped all flexi, good solid pedal. took off one at a time and bled that wheel, then removed all and bled again, still getting air!!!!
and i mean at each wheel each time.
Vagrent
Yaaaar
- Posts
- 18,109
- Location
- Poiret West Sussex, Chichester.
is that like fireing a proton torpedo through a ray sheilded exhaust port to destroy the death star ?
Vagrent
Yaaaar
- Posts
- 18,109
- Location
- Poiret West Sussex, Chichester.
That is exactly what I said,you just cleverly used the letter's in a different order to convey the same thing.
Series71 hit the nail on the head
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
edited for accuracy
photon topedo - star trek
proton torpedo - star wars
if yer gonna correct me get it right :doh:
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
photon topedo - star trek
proton torpedo - star wars
if yer gonna correct me get it right :doh:
well says a lot about a person being a sci-fi geek should read a bit more of a series workshop manual , might make for less break downs
should read a bit more of a series workshop manual , might make for less break downs
geek and proud of it yer silly old goat
Rangie427
New Member
- Posts
- 35
- Location
- Dengie peninsular
Engine and box in today
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Hmmm! This seems like a poor copy of a thread that's already goin'....
http://www.landyzone.co.uk/lz/f16/what-have-you-done-your-landie-today-62254-944.html
http://www.landyzone.co.uk/lz/f16/what-have-you-done-your-landie-today-62254-944.html
ford369
New Member
- Posts
- 53
- Location
- rickmansworth
replaced my head gasket yesterday,glad its done cos its ****ing down today
Gem
New Member
- Posts
- 256
- Location
- Pilton, Shepton Mallet
That be a lovely engine on chassis! who needs a body?
I passed MOT today, after about three weeks of fiddling with brakes! well waiting for parts, etc.. (the rest took two days).. the wierdest test so far, had the mechanic and I tightening brakes adjusting headlight beam, horn disappeared and reappeared, main beam same, had to take 15 mins out to run round the block (in the vehicle) with my foot on the brakes to correct front imbalance... We were DETERMINED to get it through!!
I also took the towing bracket off, and cleaned it up and repainted it so I can fit a nato hitch to it, just got a trailer to work on.. (Brockhouse/Sankey can't find out which yet).
determined to get round to servicing zenith soon!!!
I passed MOT today,
after about three weeks of fiddling with brakes! well waiting for parts, etc.. (the rest took two days).. the wierdest test so far, had the mechanic and I tightening brakes adjusting headlight beam, horn disappeared and reappeared, main beam same, had to take 15 mins out to run round the block (in the vehicle) with my foot on the brakes to correct front imbalance... We were DETERMINED to get it through!!I also took the towing bracket off, and cleaned it up and repainted it so I can fit a nato hitch to it, just got a trailer to work on.. (Brockhouse/Sankey can't find out which yet).
determined to get round to servicing zenith soon!!!
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Just one thing MATE who posted it first
FAIL!!
Seeing as this thread http://www.landyzone.co.uk/lz/f16/what-have-you-done-your-landie-today-62254.html started nearly 3 years ago...and yours started 5 days ago...I'd say FAIL!
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
bobbler
New Member
- Posts
- 2,773
- Location
- County Durham
Just one thing MATE who posted it first
Since Storm isnt going to i'm going to ask................
Permission to say COCK :doh::doh::doh:
