fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
what is this?
- Thread starter fett
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 3,275
- Location
- Rushden, Northants, UK
Vacuum pipe connection.
You only need one, blank this one off.
The fluid is probably from the breather pipe on the other side.
Peter
You only need one, blank this one off.
The fluid is probably from the breather pipe on the other side.
Peter
Last edited:
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
thanks,when you say one, I cant even see this little nipple on the other carb, is it located in another place on the drivers side carb?
- Posts
- 3,275
- Location
- Rushden, Northants, UK
If the carb bodies are identical, they should both have one, it's for the vacuum advance/retard on the distributor.
Possibly if the carbs are handed there will only be the one port, but where does your advance/retard pipe go to? Manifold or carb body?
Peter
Possibly if the carbs are handed there will only be the one port, but where does your advance/retard pipe go to? Manifold or carb body?
Peter
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
pretty sure it goes to the fanimould, I will have a look at the weekend. I wonder why the bad petrol was coming out of it?
- Posts
- 3,275
- Location
- Rushden, Northants, UK
More likely breather vapour and a bit of blow-back from the main jet.
Peter
Peter
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
yeah I am guessing the 7 min it run on the drive with choke and no actual driving didnt help lol
- Posts
- 3,275
- Location
- Rushden, Northants, UK
Sounds about right 
Peter
Peter
