What have you done to your Landie today.

replaced the radiator and hoses, new coolant, new alternator and belt, fresh T box oil, engine oil and filter change too! ive had the day off before you ask.

was worried the petrol in my IC would ignite when i initially started it up! but it was ok and i went for a bit of a drive. joy.

G

i took out the stop fuel solinoid for the second day in a row to clean it as it had jammed and would not turn off

tried for the third day in a row to paint the new window'd side panels, and cleared out the shed instead so i can then FINISH the paint, well tom did anyway

Ah drove mine again
Now ah'm gonna clean out me garage so's ah can get the bus in tae see what's needed tae fit me steerin' gaurd

bin sorting all the bits to fit me new overdrive the day, put a nother coat of paint on me new front panel. went scavenging for diff's at me ma's car grave yard as well...

pimped my ride n had an A bar put on!!!!

made two more plates fur the footwell/inner wing repair (is that all!) and drawn up 4.

Disco - moved it on my mams drive to stop the fooking council moaning

110 - cleaned some of the interior and statred on the wiring

Seriies is being moved tomorrow so i can get my 110 in the shed

Decide to plant something
Found this after taking a plate off the passenger footwell.

Also fitted transfer box and filled with oil, connected up diff lock and high / low thingy (works) and started to fit handbrake drum (rained off) so went home...

shifted my series - what a job that was , pulled it on to the trailer with my 110, now know the difflock + low ratio all works shame the transfer box is being swaped for a disco one

then ran out of diesel in my 110 just as it was half way into the shed.

Be going to start on painting the inside on the 110 later.

drove mine to a friends house, and then to work.

Pressure washed the engine bay due to the (over)filled oil blowing itself through the dipstick tube like a geyser.

fook all

Drove mine tae the shop for a carry out, me and me mate fitted the bargain steerin' gaurd and then ah took a photie of it

Should paint it black

landowner said:

Should paint it black

Click to expand...

And call it sambo??

I have fitted my handbrake drum and dug all the mud out of the bulkhead by the bottom hinges and out of the bulkhead outriggers where it was damp and solid. Then flushed it all out and found not much metal left so out with the welder on Tuesday. (off to Elvington tomorrow for a blast in a Lambo/Ferrari/Aston/Porshe/BMW and whatever else is there while it all dries out ).

put some greasy hypoid mix in to chrome balls

Took An Angle Grinder To The Non Folding Folding Steps Coz They Keep Getting Bent

Finally drove it

Well pleased and ready for a weekend of mud plugging now (might even fit the snorkel)