ShaunPDisco
Active Member
- Posts
- 487
Used the wifes credit card to treat the disco to some easy on parts as the MOT is next week!!
Looks like a weekend on my back with the disco on top!!
Looks like a weekend on my back with the disco on top!!
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Chrisw8
Well-Known Member
- Posts
- 1,972
- Location
- Top of the Hill
reconnected brake pipe.
finished dismantling front bumper.
finished dismantling front bumper.
You will probably get more replies if you start a new thread on that topic rather than piggybacking on an unrelated existing thread.
Regards
Chrisw8
Well-Known Member
- Posts
- 1,972
- Location
- Top of the Hill
washed rubber bumper parts and doused metal bits in Fertan.
lcbandit
Well-Known Member
- Posts
- 1,548
- Location
- west yorks
Driven it to work n put diesel in
muckmuck
Active Member
- Posts
- 798
- Location
- chatteris cambridgeshire
Plugged an hole in my fuel tank....looks like I need a new one ....fitted my nice shiny gear knob
Chrisw8
Well-Known Member
- Posts
- 1,972
- Location
- Top of the Hill
gave bumper 2 coats Bonda Primer
- Posts
- 83,230
- Location
- Embasinga stocæ
Removed ns front brake flexi and steel caliper pipes as they are corroded together .
.
Morganholidayman
Member
- Posts
- 59
- Location
- Essex
Not actually today but over last few days......
Bought a Mud bulkhead bar at LRO show and fitted that last Saturday, big improvement to comfort. Also bought a steering shield and fitted that yesterday. Happy now, for a while!
Bought a Mud bulkhead bar at LRO show and fitted that last Saturday, big improvement to comfort. Also bought a steering shield and fitted that yesterday. Happy now, for a while!
punkawallah
Member
- Posts
- 22
- Location
- Underneath me 110 having a snooze
Stuck on a cheapo snorky from the Summer Range of Landy fashion from LR parts and tested all the mods to the heater made over the last few days and all the new lights as the old lot were rotten, fog lamp was actually full of water. The new bilge blower works much better than the Landy original one in me 1990 110 CSW
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
recieved a few bits n bobs, couple of spares and some bits to go on this next week one evening if its nice out
My power steering pump to box pipe has rubbed and is now leaking. Its the metal part of the pipe but I can't seem to find a direct replacement for the whole metal and rubber pipe.
I have a td90 with a 200tdi fitted and wondered if something strange has been made up to fit it. Here is a joint between the metal pipe and rubber flexi bit
http://tapatalk.imageshack.com/v2/14/10/03/4b895e7a2cbc28042098
e067bd8b7ef6.jpg
The rubber hose is then adapted back to a metal pipe that bends round into the pump. Bit hard to see but its down there!
Anyone have any idea if this is a part I can buy or do I have to get each individual part and make it up.
Did notice that the long metal pipe from the box doesn't seem to be bent in the correct ways so it sticks out a fair bit.
I have a td90 with a 200tdi fitted and wondered if something strange has been made up to fit it. Here is a joint between the metal pipe and rubber flexi bit
http://tapatalk.imageshack.com/v2/14/10/03/4b895e7a2cbc28042098
e067bd8b7ef6.jpg
The rubber hose is then adapted back to a metal pipe that bends round into the pump. Bit hard to see but its down there!
Anyone have any idea if this is a part I can buy or do I have to get each individual part and make it up.
Did notice that the long metal pipe from the box doesn't seem to be bent in the correct ways so it sticks out a fair bit.
punkawallah
Member
- Posts
- 22
- Location
- Underneath me 110 having a snooze
My power steering pump to box pipe has rubbed and is now leaking. Its the metal part of the pipe but I can't seem to find a direct replacement for the whole metal and rubber pipe.
I have a td90 with a 200tdi fitted and wondered if something strange has been made up to fit it. Here is a joint between the metal pipe and rubber flexi bit
http://tapatalk.imageshack.com/v2/14/10/03/4b895e7a2cbc28042098
e067bd8b7ef6.jpg
The rubber hose is then adapted back to a metal pipe that bends round into the pump. Bit hard to see but its down there!
Anyone have any idea if this is a part I can buy or do I have to get each individual part and make it up.
Did notice that the long metal pipe from the box doesn't seem to be bent in the correct ways so it sticks out a fair bit.
By coincidence I have just come back from Halfrauds with 2 rolls of FIXX-IT tape to do a temp job on me filter to turbo pipe and this may well get you out of trouble for a bit. It is one of these self bonding silicone thingiebobs good for up to 500 psi if you believe the blurb.
Ha cheers for that. Ide rather replace as soon as pos. I can drive my work van about but rather have me landy! Does that stuff work on metal?
punkawallah
Member
- Posts
- 22
- Location
- Underneath me 110 having a snooze
Metal ,plastic etc they claim and it's good for sealing and insulating up to 8000 volts but it's too wet for me to go outside to test it. Only reason I bought it is that there is a minor age related leak in me intake pipes [and in the 110 too
]and I can't find a new set of hoses at reasonable price for the 2.5TD, all the sites show from TDI onwards only.
- Posts
- 83,230
- Location
- Embasinga stocæ
found out my brake pipe flaring tool is ****e
