What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
adrianwoolmore
New Member
- Posts
- 3
- Location
- East Mids
Very new to Land Rovers. I hav a Discovery 2 on a W. The wipers front and rear plus washer jets, do not work when it is coldor damp, or freezing. I am told it is the motor, which I am not convinced. Can anybody help.And can you tell me how I accessthe wiper motor
MrPDude
Active Member
- Posts
- 566
- Location
- Birmingham
Nowhere near as much as I should have!
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Fitted the new injector leak off pipe and removed the viscous fan 
- Posts
- 67,745
- Location
- halfway between here and there.
try asking this question in the discovery section,you might get a half sensible answer there.:bounce::bounce:
nick2303
Well-Known Member
- Posts
- 4,255
- Location
- Leeds (not by choice)
broke it!
boo hoo!
dented both off side doors and rear quarter panel..
very slippy lane, ended up leaning on the doors..
rear door so bent i cant open it...
boo hoo!
dented both off side doors and rear quarter panel..
very slippy lane, ended up leaning on the doors..
rear door so bent i cant open it...
easye1
Banned
- Posts
- 8,557
looked out the window at mine thinking about doing the gearbox oils,
but saw the rain and thought about it again,
till the next time i think about it...
at least i`m thinking about it...
but saw the rain and thought about it again,
till the next time i think about it...
at least i`m thinking about it...
TaDa
Active Member
- Posts
- 432
- Location
- Barnstaple or thereabouts
Yeah - it seems to have rained every day of my holiday!
The jobs on my D2 are just mounting
I have to clean out the red connector on the ecu (it still seems to be oozing out 3 years after I changed the gasket! Albeit only a small amount every few months now)
I've got to fix the heated windscreen connector that had previously burned out!
Sort out the fuel gauge problem (one minute its full, the next empty - as if it were a V8 RR)
Replace the bush at the bottom of the gear lever!
etc etc
And it still keeps raining!
The jobs on my D2 are just mounting
I have to clean out the red connector on the ecu (it still seems to be oozing out 3 years after I changed the gasket! Albeit only a small amount every few months now)
I've got to fix the heated windscreen connector that had previously burned out!
Sort out the fuel gauge problem (one minute its full, the next empty - as if it were a V8 RR
)Replace the bush at the bottom of the gear lever!
etc etc
And it still keeps raining!
when you say gasket on ecu plug did you chang the injector wiring harnessYeah - it seems to have rained every day of my holiday!
The jobs on my D2 are just mounting
I have to clean out the red connector on the ecu (it still seems to be oozing out 3 years after I changed the gasket! Albeit only a small amount every few months now)
I've got to fix the heated windscreen connector that had previously burned out!
Sort out the fuel gauge problem (one minute its full, the next empty - as if it were a V8 RR
Replace the bush at the bottom of the gear lever!
etc etc
And it still keeps raining!
foxyjam
Active Member
- Posts
- 119
- Location
- Bourne, lincs
Fitted my Christmas present. A set of led stop/tail lamps. Picture of one side fitted, no need to say which. A big improvement over standard and looks better.
First picture of tail and picture on the **** is of brake lights although camera doesn't tell much because of light level.
First picture of tail and picture on the **** is of brake lights although camera doesn't tell much because of light level.
Attachments
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
foxyjam
Active Member
- Posts
- 119
- Location
- Bourne, lincs
Sure does! They're from bolt on bits, they have an eBay shop. I've got front and rear indicators too but need to get they're rdx flasher unit to make them work. Going to get the led front side lights and rear number plate light too.
Also seen xenon HID conversion kits for font main lights too for about £30. Might give them a try too for that price
Also seen xenon HID conversion kits for font main lights too for about £30. Might give them a try too for that price
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
All today to fit propshafts to the 80 inch, and fabricate the exhaust from lots of bits. aggrrhhhh!! ~Still have rear silencer and rear section to do!!!!
I hate exhausts!
I hate exhausts!
- Posts
- 13,800
Got the UJ sorted...no more chirping
Told i've got to try to get hold of a double cardon disco td5 prop ( no idea what it is or if i"ce spelt it right )
Told i've got to try to get hold of a double cardon disco td5 prop ( no idea what it is or if i"ce spelt it right
)MrPDude
Active Member
- Posts
- 566
- Location
- Birmingham
Wow BGB was right... You have swallowed a Haynes manual for Xmas... That's right what you need. Although unless you are lifting it loads and going for some good cross axle articulation then it ain't really an issue. Gotta spend a lot of money before you need to invest in stuff like that
Defender-Sam
New Member
- Posts
- 358
- Location
- Burton Upon Trent
Made a start on my wheel carrier,
Sam
Sam
- Posts
- 83,230
- Location
- Embasinga stocæ
NoOOO!
Yu pm'd me. I told ya not to do this ****! Yu aint listened. You have opened the gates of hell!!! :flame:. :behindsofa:
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
You want help go to spam when offering your services
so if your shot blaster your using metal filings ? What do you use on the delicate parts ?
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
