What have you done to your Landie today.

Where to start? First off Removed old power steering box on my 200tdi 110, and proceeded to replace it with a lovely reconditioned one i bought from a mate for much cheepness, only to find that the flow pipe from the pump had a male end just ever so slightly larger than the hole it has to go in. not only that i had to make new bolts to hold the bloody thing on with. after taking time out from that to do a quick service and covering myself in landy blood in the process i realised that i had to make an attempt to cobble somthing together to get my steering back so i found a fitting to go in the box and used hydrolic hose clamped from the end of the pipe to the box, job well done i thought to myself. Not so. Whilst parking in the local supermarket car park the make shift join gave way and i flooded the carpark with fluid. to make matters worse some smart arse shouted over "you've got a leak". well that was it, into the shop to buy booze and a very stiff drive home. for a proper bath and fair share of said booze. What a s**t of a day.

Woohooo! I stuck my Landyzone sticker on today! Tomorrow i'm attempting my front sunroof, its leaking very slightly the b@stard!

Fitted new propshaft UJs.

Going to wire in my new CD player tomorrow and fit it to the Raptor dash, fit the new aerial, and get my CB radio connected back up again.

Might decide to upgrade front speakers (suggestions, anyone?) and try and work out how I can fit a subwoofer discretely.

Nuffin……didnt even look at it

Borrowed a screwdriver off the nearside wing to stir some paint with

Nothing, went to work, came home and now getting ****ed............

Dr_evil said:

Nuffin……didnt even look at it

Click to expand...

Bet ya still have sound of it ringing in you ears mind

Scratched my head alot wondering how to remove the snapped bolt which is part of the adjuster power steering / alternator belt assembly... Will update on progress tomorrow!

chunkymunky said:

Bet ya still have sound of it ringing in you ears mind

Click to expand...

Its quiet now need to get a vid of it for comparison really

Off shooting today though so its about to get an outing

Just seen truck cab 90 with a stacker. No noise? Real nice, bit of luck will bump into him and get a proper look.

Today i will be listing the disco for breaking......

Shifting the 90 to garage for gearbox fix. Worth just putting disco transfer on while at it. Only a td. Not doing the conversion yet

The stacks don't make that much noise if you're just doing 30, my straight through was actually very quiet when I wanted it to be (same idea as mine was just a tractor stack stuck sideways to the downpipe)

Took it down the Fosse way. All been travelled now so was very tame but still fun.

changed engine oil and filters new sump plug an washer...fitted new thermostat,,heater seems to blow warmer and temp gauge has moved slightly too,,seem to have a slight leek on the matrix now,oh well another excuse to get dirty

got a fresh mot on my 90 today

Cleaned muntjac blood off n/s alloy.uke:

Silverlandy said:

Cleaned muntjac blood off n/s alloy.uke:

Click to expand...

Have you not had to clean the boot as well?

SHORT ROUND said:

got a fresh mot on my 90 today

Click to expand...

So is she all finished an ready to get broken?

she will never be finished and i have already broke her twice since having her on the road bud

put a rear ladder on mine... got it for £20 on ebay and it was only 20 miles from my house!

Fixed indicator self-cancelling ring, then fixed indicator fuse when it blew! Fixed the trailer connector that wouldn't work properly, then put new number plate on new trailer .. well, given to me so new to me but not new, new ..

Found rear door is sagging a bit and it looks like a spacer in the rear hinges is missing! Will have to look at this tomorrow, when I also need to get it on ramps and check the cracking noise I think is coming from the UJ's ...